quax

i'm sure the both the gold and the bps need a good cleaning - will definately do that.

i haven't jumped off into the hi density stuff yet, but may try the H-13 6s before too long.

with the 3" gun, i have experimented with the remington wingmaster HD waterfowl version - it's 1.375oz at 1450fps. with the jellyhead it put 103 in a 10" ring at 40. this shell actually performed better than any lead 3" i shot with the jellyhead.

the jellyhead/gold combo with a winchester HV 1.75oz #5 was in the 80s. last year when i shot the trulock .665 in the gold, i got 101 in the circle with the same shell. i have since gotten rid of this choke, but would love to see how it would do with these waterfowl HD loads.

I didn't mind experimenting with these duck loads because i got them on sell in february at wal-mart at a rediculous price, plus there is a spring rebate going on at remington for HD loads.

Roadkillwarrior

I have a browning gold hunter with a pattern master choke tube. When patterning my gun the other day I got 60+ pellets in a 10" at 40 yards using 3.5" 2oz high vol. #6 shot winchester supremes. Is this not a very good pattern or is it safe enough to take a shot out to 40 yards?

quax

rkw, i'd look for something more. you might try 5s or 4s thru it and see how it does. i like to see at least 100; 85 would be my minimum. as said before, clean your barrel good for best results.

Oneshot7

Yes sir I do believe that is the one. It is an awesome choke, but I would guess it to be pretty hard to find for the BPS now days, everything has gone invector [:@]. My Bps is aobut to turn into a turkey only gun anyway, duck hunting has bent the ejectors on the sides and it will jam unless I use EXPENSIVE shells.

stretch56

It helped the pattern 100% in my gun 2 ounce loads would not pattern at all tried several chokes.