PSE IMPALA
#1
Spike
Thread Starter
Join Date: May 2004
Posts: 57
PSE IMPALA
I took the plunge and bought a PSE Impala recurve last year and love it. Since hunting season is over (no i didn't get a chance to use it b/c not proficient enough) i went to pick my recurve up again and the brace height sems way off. This is a take down bow so i checked the bolts both tight. But for some unknown reason the top of the bow brace height is around 6 1/2 and on the bottom its 7. When i bought it the measurements were equal and definitely not off that much.
I have never left the bow strung for more than 2 days and that was only when i was doing alot of shooting over a weekend.
Any suggestions or incite?
I have never left the bow strung for more than 2 days and that was only when i was doing alot of shooting over a weekend.
Any suggestions or incite?
#2
Giant Nontypical
Join Date: Feb 2003
Posts: 9,175
RE: PSE IMPALA
Unless you got the limbs switched, top on bottom and bottom on top, then something is wrong with that bottom limb. It could be delaminated or otherwise getting ready to break. I'd suggest sending it back to the dealer, or to PSE, and getting it thoroughly checked out.