bowtech limb prob

Reply Subscribe

Thread Tools

03-19-2005, 07:28 PM

fishon01

Thread Starter

Join Date: Feb 2003

Location: Tygh Valley or USA

Posts: 166

bowtech limb prob

Put on a new set of limbs on a 03 sc pat, and when i put the idler and cam back on it's got slop in it!
They both slide back and forth, any idea's

.............fishon

03-19-2005, 08:41 PM

BowTech_Shooter

Nontypical Buck

Join Date: Feb 2003

Location: NW Ohio USA

Posts: 1,532

RE: bowtech limb prob

Quote:

ORIGINAL: fishon01

Put on a new set of limbs on a 03 sc pat, and when i put the idler and cam back on it's got slop in it!
They both slide back and forth, any idea's

.............fishon

My guess would be that either 2004 limbs were accidently ordered or accidently shipped as the limb fork cut outs are a bit wider on them versus a 2003 or prior model. I would contact the dealer you purchased them from ASAP and let them know what happened.

03-19-2005, 09:12 PM

fishon01

Thread Starter

Join Date: Feb 2003

Location: Tygh Valley or USA

Posts: 166

RE: bowtech limb prob

thanks for the reply bt shooter !

I ordered them straight from bt pro shop, and you are correct there is a wider cut out. So that means they sent the wrong one's[:'(]

03-20-2005, 04:43 AM

DaveC

Nontypical Buck

Join Date: Feb 2003

Location: Crosby TX USA

Posts: 2,599

RE: bowtech limb prob

Ouch!!

03-20-2005, 07:34 AM

KBacon

Typical Buck

Join Date: Dec 2003

Location: Greenfield, IN

Posts: 953

RE: bowtech limb prob

fishon01... now just order the '04 cam and idler that contain the bearings and the correct spacers...

03-20-2005, 09:27 AM

fishon01

Thread Starter

Join Date: Feb 2003

Location: Tygh Valley or USA

Posts: 166

RE: bowtech limb prob

kbacon....It's funny you mention that , cause i asked if they would fit my o3 limbs. Which they would'nt of course.
So maybe thats the way to go if the price is'nt over board