Got my new Bow
#1
Thread Starter
Join Date: Mar 2004
Location:
Posts: 881
Got my new Bow
So i got my new protec with the 3000 limbs instead of the 2000 limbs that I got earlier this year. Well I must say I'm not real happy. The draw length is off by 1.5 inches, no real big deal. The let off is 43% with 75% modules. The poundage is 68 instead of 60 (And my scale is generally 4LBS low). Also I cannot turn the limb bolts out. I don't know what they have gotten wrong on this bow, I cannot figure it out any ideas?
#3
Thread Starter
Join Date: Mar 2004
Location:
Posts: 881
RE: Got my new Bow
ORIGINAL: nodog
Are you saying you changed the 2000 limbs on you bow with 3000?
Are you saying you changed the 2000 limbs on you bow with 3000?
#5
Giant Nontypical
Join Date: Dec 2004
Location: Ohio
Posts: 7,876
RE: Got my new Bow
ORIGINAL: ewolf
No I just bought a whole bow with 3000 limbs. I cannot turn the limb bolts out either (this is why I edited my earlier post)
ORIGINAL: nodog
Are you saying you changed the 2000 limbs on you bow with 3000?
Are you saying you changed the 2000 limbs on you bow with 3000?
Take it back now. Don't waste another minute on it other than the trip back and the wasted breath. They most likely used a ratch-allen head tool and cranked on the bolts. That right there is a reason to take it back. They have a torque setting and exceeding it could void the warranty. It's unfortunate but not your problem.
#7
RE: Got my new Bow
If your shop never set it up for you before you left ,I'd be looking for another shop to deal with .It's the shop's responsability to be sure that your NEW bow is set correctly before you take it home ,and if they didn't I'd definetly be haulling it right back to them and make sure they do it right this time. I can't believe they actually let you take it home in this condition. That's rediculous.
nubo
nubo
#9
Thread Starter
Join Date: Mar 2004
Location:
Posts: 881
RE: Got my new Bow
The proshop obviously hacked a bow out of many new bows that they had. They are ordering me a new bow to replace the one they gave me. I will not order a bow there again. Well now I'm still out of a bow for 2 weeks, at least. Oh well just glad I figured out what was wrong. How did I know this is what they did? Hoyt on there cables serves the loops that connect to the limbs, these were not served on this bow. So that tells me the bow was not a original hoyt bow. Then a simple search by a Hoyt employee showed that the bow left the factory with 2000 limbs. Oh well it all works out in the end. What can I do to prevent them from selling this one? Any ideas?
#10
RE: Got my new Bow
What can I do to prevent them from selling this one?