VAPOR TRAIL STRINGS
#1
Thread Starter
Join Date: Jan 2005
Posts: 42
VAPOR TRAIL STRINGS
Im looking to get new strings and cables for my switchback. Was going to get winners choice but I have heard that they are not the best for a mathews bow with the roller gaurd. somebody told me about Vapor trail and I just wanted to know if anybody has heard of them and has used them.
#2
Fork Horn
Join Date: Feb 2003
Location: Greenville S.C. USA
Posts: 212
RE: VAPOR TRAIL STRINGS
I've put them on 2 bows and been very happy with them. They are well made with little to no creep. I just put a set on a Hoyt Super Tech and after geting them all twisted back to specs, went from 314 to 323 with a 360 gr arrow at 70/30". The price for all 3 strings was $79.
When my Allegiance come in I'm definitely going to see if they improve its performance as well.
When my Allegiance come in I'm definitely going to see if they improve its performance as well.
#4
Fork Horn
Join Date: Feb 2003
Location: Greenville S.C. USA
Posts: 212
RE: VAPOR TRAIL STRINGS
I don't know if Bowtech is using the new VTX strings or not though. I think Bowtech is using TS1. You are probably right though; there is little room for improvement on the Bowtech strings. Hoyt's on the other hand.......well let's just say the VTX were a nice improvement.
I haven't heard what the diferenc in the VTX and TS1 is (if there is any).
I haven't heard what the diferenc in the VTX and TS1 is (if there is any).
#5
Typical Buck
Join Date: Dec 2003
Location: Greenfield, IN
Posts: 953
RE: VAPOR TRAIL STRINGS
Yeah.. I'm not sure if VTX is the material or just what Vapor Trail is calling their strings. I'd think if VTX was a new material that it'd be all over the net alreay like TS1 was last year. But I'm not for sure. Yeah Hoyt stock strings are pretty bad.
#6
Nontypical Buck
Join Date: Feb 2003
Location: Onamia,MN.
Posts: 1,375
RE: VAPOR TRAIL STRINGS
Has anyone replaced zebra strings with these?I'm just wondering about the length of the string--if it would be the same or a little shorter than the zebra due to the difference in string diameter.
#10
RE: VAPOR TRAIL STRINGS
Ive used vapor trail strings for awhile now , great product . I have replaced zebra strings with them , and would not worry about the diferance in string diamiter , as the last zebra string had stretched over 3/4 of an inch out of spec , and theres no way diamiter will make that much diferance .