I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
#1
Thread Starter
Join Date: Dec 2003
Location:
Posts: 21
I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
Right now I am shooting a Mathews Legacy with a 27 inch draw length plus a string loop. And I shoot this bow very well, but I think ANYTHING OVER 27 is going to be to long for me with the string loop added to it. So what draw length should I get for the Allegance because I want to have it set for the 80% let off. Having it set up for the 80% let off adds a little to your draw length from what I understand. Any help would be great.
Thanks
Thanks
#3
RE: I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
I keep the same draw length from Bowtech to Mathews. I owned a BKII, an Outback and now an Allegience. All the same draw length, even with the swith in let-off. Seemed to work perfectly.
Kelly
Kelly
#4
RE: I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
The Equalizer cam bows I've measured have been dead on. Well, one was 1/16" short (maybe I made a small error in measurement). Get your draw length measured properly. You should then be ok to order what you need.
#5
Join Date: Nov 2004
Location: Ohio
Posts: 262
RE: I am going to be geting the BOWTECH ALLEGANCE, but I have a ? on what draw length
From your above description you want to go with the 27" draw length on the Allegiance. The bows come at 80% letoff at the specified draw length. If you want to change it to 65" then you would lose approx. 1/4" on the DL.