I bought the Mirage but !
#22
RE: I bought the Mirage but !
I haven't actually put my hands on one of these rests yet, but could you use some of that teflon brush on stuff rather than the tube? My buddy put some on his trophey taker and it made 100% difference.
#23
Join Date: Feb 2003
Location: montrose colorado USA
Posts: 90
RE: I bought the Mirage but !
Range.. To Replace is Easy, just two screws and the cup wire comes out. You do not need to reset or retune the MIRAGE...
It will last many shots and it is regular peep tube ...only on the draw does the arrow touch the launcher...
When you Release you get TOTAL CLEARANCE...
GKF Tech
It will last many shots and it is regular peep tube ...only on the draw does the arrow touch the launcher...
When you Release you get TOTAL CLEARANCE...
GKF Tech
#24
Fork Horn
Join Date: Feb 2003
Location: Steuben County, NY
Posts: 277
RE: I bought the Mirage but !
My mirage came in yesterday and I got it on my bow. I was wondering do I use both the cord and the tube, or just one. I plan to use the cord only. How would I tie the cord to the cable to make sure it does not slide or come off at the wrong time. I was thinking of putting a nock on the cable, but was not sure if this would damage the cable or not. Thanks
#25
Join Date: Feb 2003
Location: cedaredge colorado USA
Posts: 13
RE: I bought the Mirage but !
If you have the Mirage body really close to the back of the shelf the body can be whipped forward because of torque and or shock when shot. the body may be slapping the back of the shelf. I had the problem and fixed it by putting a little pad between the body and the shelf. You can also slide the rest rearward slightly to increase the gap between the body and the shelf.