BowTech Allegiance!!
#31
RE: BowTech Allegiance!!
Hey walks , what kind of rest are you useing on the bowtech , a plainsman ? or something else . Im woundering if a muzzy rest will work with these bows . With my 02 patriot ,I know it worked well if the cabels crossed above the rod . I know there have been changes in limb angle and risor , and am hopeing the muzzy rests will work on the newer model , and cam configurations .
#32
RE: BowTech Allegiance!!
Im woundering if a muzzy rest will work with these bows
Hopefully it will be here tomorrow as these guys are driving me nuts talking about it
#33
Thread Starter
Join Date: Feb 2003
Location: Alvo Nebraska USA
Posts: 2,057
RE: BowTech Allegiance!!
I'm using my own Plainsman™ drop away rest Actually, I robbed it off my poor little Justice When I walk into my archery room now, all my bows are jumping up and down, wanting to go outside and play and then it happens[:-] I grab the Allegiance and all the rest of them start whining[X(] I'm thinking I should just bring the Allegiance to bed with me to avoid something bad happening to her in the archery room overnight[]
I've thought about trying the Drop Zone arrow rest just to try something different and compare mine with, I can make mine cheaper but don't seem to have time lately for all that machining!
I've thought about trying the Drop Zone arrow rest just to try something different and compare mine with, I can make mine cheaper but don't seem to have time lately for all that machining!
#34
RE: BowTech Allegiance!!
Ok just got back from setting up and shooting my Allegiance.
The MZE works real well on it.
As to how the bow feels and shoots all I can say is holly crap Bowtech has done it again.
As for the speed 28" draw, 60lb, 400 gr arrow 265fps consistantly through the crono and whisper quite 1/2 the time I did not know the bow had shot except for the THWACK into the target.
The MZE works real well on it.
As to how the bow feels and shoots all I can say is holly crap Bowtech has done it again.
As for the speed 28" draw, 60lb, 400 gr arrow 265fps consistantly through the crono and whisper quite 1/2 the time I did not know the bow had shot except for the THWACK into the target.
#37
Fork Horn
Join Date: Feb 2003
Location: Vernon Hills IL USA
Posts: 382
RE: BowTech Allegiance!!
One thing interesting about the E - cam is that based on the #'s posted, it likes a heavier arrow than IBO. This is a bit of a contrast to the Infinity cam which seemed to perform better closer to IBO.
Not that I have any idea why that is, but for hunting especially the E-cam #s suggest it's more versatile for hunting.
Not that I have any idea why that is, but for hunting especially the E-cam #s suggest it's more versatile for hunting.