Kanga

check for the timing marks BT put on the cam either side of the limb.

S.H.H.S.

?????

walks with a gimp

S.H.H.S. you can feel a kind of a double "bump" when you hit the flat spots on the Dually's modules at full draw. You should just feel one solid bump at the wall at full draw telling you that they are hitting exactly at the same time. Take note of this when shooting normally and you should be able to tell if they are "in" or not. If they need synchronization, just twist the cable who's cam hits the wall first. You can see this happen by drawing your bow just like you're going to shoot an arrow while watching in a large mirror. 1/2 a twist is all it takes to make a difference sometimes so go slow when putting twists in your cable and work with only one cable.

Cougar Mag

Uh sorry, wrong topic........I misread this one for a Martin new 2005 bow topic.

Techy

I've heard a couple things, but I'll let you guys be surpised

Kanga

I bet you dont have the picture I have of the new bows

For only $5 payed into my pal pal account I will email it to you