Hoyt limb switch
#1
Thread Starter
Join Date: Aug 2004
Posts: 3
Hoyt limb switch
I've got a Pro-tec with xt2000 limbs at 60-70# and found a set of Ultra-tec xt3000 limbs, 50-60#... just begging to be put on for indoor this winter, would this swap work? I'm assuming a cable and strinc change will have to happen as well. If they will work on the bow, would it be worth it in your opinion? Draw length is 30" if that matters.... thanks folks for any guidance.
#2
RE: Hoyt limb switch
You will have to check with Hoyt to figure out whether the deflections will work. Each hoyt bow has a specific limb deflection for each cam size.
If the deflection would work, you most likely would also need a new set of cams & modules as well as string and cables.
It's really not worth the hassle & $ in most cases.
If the deflection would work, you most likely would also need a new set of cams & modules as well as string and cables.
It's really not worth the hassle & $ in most cases.