Bare Shaft Tuning...Bullpoop or Not?
#1
Bare Shaft Tuning...Bullpoop or Not?
Sorry if the title is too much [&:]..I just remembered this old movie called Amazon Women on the Moon that was done by the guys who did Kentucky Fried Movie, and there was this "skit" based on Ripleys Believe it or Not...but...I digress
Anyhoo...plain and simple...
For compound shooters with a release..do you think BareShaft tuning has merit..or is the BS tuning, BS?
discuss
title is fine now
Anyhoo...plain and simple...
For compound shooters with a release..do you think BareShaft tuning has merit..or is the BS tuning, BS?
discuss
title is fine now
#2
RE: Bare Shaft Tuning...Bull$hit or Not?
I really like bare shaft tuning. Its showing that all the energy is being drivin into the shaft and not wasted by a crooked release. Plus, with your bare shaft shooting the same as fletched, in theary it would mean less liklihood of windplaning cause your not so much relying on feathers for steering, but more for stability. Thats my two cents anyways.
#3
Join Date: Feb 2003
Location: NH
Posts: 56
RE: Bare Shaft Tuning...Bull$hit or Not?
I feel it does have some merit. I use it as a starting point to determine the correct spine through paper and adjust poundage and or tip weight. Then paper tune with a fletched arrow, then group tune.I find for me it speeds the process of the following tuning process. As with all methods of tuning i wouldnt just rely on one and settle with it. I feel it just another tool towards supertuning.IMHO
#4
Giant Nontypical
Join Date: Feb 2003
Posts: 9,175
RE: Bare Shaft Tuning...Bull$hit or Not?
I've done it for release shooting and I don't see any reason it can't work at least as well as paper tuning. Only problem is, most people don't do bareshaft tuning correctly. Just stripping the fletches off and shooting the thing is WrOnG!
Stripping off the fletches not only removes the steerage, it also changes your FOC. If you're shooting vanes on your fletched arrows, it changes FOC BIG TIME! To keep the FOC consistant with your fletched arrows, you gotta wrap some duct tape around the nock end of the shaft. How much depends on how much weight you gotta make up.
Stripping off the fletches not only removes the steerage, it also changes your FOC. If you're shooting vanes on your fletched arrows, it changes FOC BIG TIME! To keep the FOC consistant with your fletched arrows, you gotta wrap some duct tape around the nock end of the shaft. How much depends on how much weight you gotta make up.
#5
RE: Bare Shaft Tuning...Bull$hit or Not?
I also use it for fine tuning my bows. Or should I say micro-tuning. While many guys paper tune I consider it a waste of time. Don't get me wrong. Any tuning is better than none, but paper is just getting the rough edges out of the arrow flight. I can do that with my eyeballs with the initial mounting of rest and such. But when I start playing with the bare shaft a lot of inconsistencies can show up. It's just plain fun to "outsmart" this thing. When I get a bare shaft flying into a 3" bullseye at 35 yards, and all I see going is a nock, then I have things pretty well in hand. I can expect target points and broadheads to shoot to the same point. And it usually works that way. Makes for a very forgiving setup and sure shows me if my form is off on that particular day.
#6
RE: Bare Shaft Tuning...Bull$hit or Not?
IMO i think it may have very little merit. It may help in the tuning process, but when you add fletching you may have to retune, or move the rest or nock point and that may possibly mess up the bare shaft tuning. It just seems like a waste of time. This is just my opinion, so be easy on me because I think alot of people will disagree
#9
Join Date: Feb 2003
Location: East Yapank NY USA
Posts: 3,457
RE: Bare Shaft Tuning...Bull$hit or Not?
Stripping off the fletches not only removes the steerage, it also changes your FOC. If you're shooting vanes on your fletched arrows, it changes FOC BIG TIME!
I do it - I like it. it will get you real close for the most part. If your form is not good or are struggling with consistancy it may be a futile project. But when done correctly it will get you close.
Of course the final tune IMO should be with fletched broadhead tiped arrows - then just tweak to get it dead on.
bare shaft IMO gives you a much better reading than fletched through paper (wich is IMO a very general description of tune)
#10
RE: Bare Shaft Tuning...Bull$hit or Not?
I believe it has merit. As for paper tuning...........I rarely get bullet holes. I admit to not having good as form as I would like, therefore I tune to my form if that makes any sense, because it provides more consistentcy for me. Not that I don't try to improve my form, but I want my bow to shoot the best for me.
I agree.
By the way, my final tuning process is tiller tuning, and that always seems to shrink my groups to the best of my ability.
bare shaft IMO gives you a much better reading than fletched through paper (wich is IMO a very general description of tune)
By the way, my final tuning process is tiller tuning, and that always seems to shrink my groups to the best of my ability.