Someone explain this to me.
#11
RE: Someone explain this to me.
OK - I was doing the above when I noticed that one of my cable strands has popped - right where it sits in the cable slide - could this be a possible culprit?
Top limb=21.8 cm, Bottom limb 21.9 cm (both essentially equal). Did I do this right?
Replace the cut string/cable and then start from scratch.
#12
Nontypical Buck
Join Date: Feb 2003
Location: Wisconsin
Posts: 3,903
RE: Someone explain this to me.
Peep moved?
#13
Thread Starter
Join Date: Feb 2003
Location: USA
Posts: 439
RE: Someone explain this to me.
Your peep moved when you backed off the limbs and now your anchor point moved. Do you find yourself adjusting your head now when at full draw to see thru the peep?
#14
RE: Someone explain this to me.
ordered a new WC cable. I wouldn't guess that everything needs to be changed - the bow is only three months old. I'll just pick it up for now - and continue the saga when the new cable arrives
#15
RE: Someone explain this to me.
When you change the draw weight on a single cam bow you affect the timing of the cam which can affect nock travel and often will change nock point height position (both of which can/will cause POI changes)