a/a and brace height settings
#1
Thread Starter
Join Date: Feb 2003
Location: monroe ohio USA
Posts: 293
a/a and brace height settings
was wondering guys if anyone has had this problem before not being able to get the right brace height or a/a.i preloaded limbs with the correct cable length and string length.i can get the a/a were it is suppose to be but unable to get the brace height right.im around 3/16 short.if i lengthen my string to try and get more brace height my a/a is off.i checked all the specs to make sure they were right but to no avail.
#3
Fork Horn
Join Date: Feb 2003
Location: Vernon Hills IL USA
Posts: 382
RE: a/a and brace height settings
Had you measured the specs when you first got the bow? They're not always exactly @ specs.
If it is a one cam bow I would make sure the cam is in the right position and then check specs.
If it is a one cam bow I would make sure the cam is in the right position and then check specs.
#4
Thread Starter
Join Date: Feb 2003
Location: monroe ohio USA
Posts: 293
RE: a/a and brace height settings
the timing on my cam was way off is why i could not reach my maximum poundage so i did have to shorten my power cable to get my timing set just right and make a few adj. on my string length to get back to my normal draw and it gave me my brace height back.