Help Fletching Quik Spins
05-02-2004, 03:32 PM
#2
Join Date: Feb 2003
Location: Louisville Kentucky USA
Posts: 1,207
RE: Help Fletching Quik Spins
They'll fit, they just need you to show em who's boss. I have been using mine with the vanes. You just have to force the wings in first and then the rest of the vane will follow. Try turning the vane a little to the side so the lip of the wing goes in first.
05-02-2004, 04:16 PM
#3
Thread Starter
Join Date: Feb 2003
Location: Georgia USA
Posts: 131
RE: Help Fletching Quik Spins
ShadowAce, thanks for the tip, it worked.
Can someone tell me the proper distance from the back of a vane to the end of the arrow, when fletching? EZ fletch has a distance of 1 1/8" and a Bitz has a distance of 5/8" if the vane is placed at the far back of the clamp. Don't know that I've ever heard the correct distance. Thanks.
Can someone tell me the proper distance from the back of a vane to the end of the arrow, when fletching? EZ fletch has a distance of 1 1/8" and a Bitz has a distance of 5/8" if the vane is placed at the far back of the clamp. Don't know that I've ever heard the correct distance. Thanks.
