WHAT is wrong with my bow
#1
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Colorado Springs Colorado
Posts: 143
WHAT is wrong with my bow
Installed new string to fix the "not going to full draw weight" problem, but it didn't fix it!! I guess I will have to take it to one of the shops here and just hope for the best. I posted about this problem on the PSE forum and got no response yet. Am I just lucky or do other people have problems like this too? Any other help from any of you would be appreciated in the meantime. Thanks!
#4
RE: WHAT is wrong with my bow
It may be that your limbs are just a tad bit weaker than what is specified for your bow. I don't know of any other way to bring up the poundage other than twisting the cables. Maybe someone else here can help more?
I would contact your bows manufacturer and ask about replacement limbs if they are not coming up to the weight that is advertised. If your bow is new they should certainly be under warranty.
I would contact your bows manufacturer and ask about replacement limbs if they are not coming up to the weight that is advertised. If your bow is new they should certainly be under warranty.
#5
Join Date: Mar 2004
Location:
Posts: 881
RE: WHAT is wrong with my bow
How low is the pondage? If it is less then 5 pounds you might have to live with it. How many times have you shot the bow? I had a bow that had 5 years of regular shooting, the older it got the weaker it got.
#6
Join Date: Mar 2004
Posts: 14
RE: WHAT is wrong with my bow
Good suggestion except I've already been there, done that. I twisted the snot out of them and can't shorten my draw any more. What else?
Twisting your cable does not shorten your draw length. Twisting your string does. If you twist your cable without twisting your string you will lengthen your draw and increase your poundage. If you have twisted the snot out of both the mabey just try untwisting your string some. But usually twisting your cable has a much greater effect since it is less than half the length of the string.
Twisting your cable does not shorten your draw length. Twisting your string does. If you twist your cable without twisting your string you will lengthen your draw and increase your poundage. If you have twisted the snot out of both the mabey just try untwisting your string some. But usually twisting your cable has a much greater effect since it is less than half the length of the string.
#7
Giant Nontypical
Join Date: Feb 2003
Posts: 9,175
RE: WHAT is wrong with my bow
Did the bow draw it's rated peak weight for you when you first got it and now it won't?
How do your brace height and axle to axle length check against the factory specs for your bow? If the a-to-a length is longer and brace height lower than they're supposed to be then either your string/cable still has some snot left to get twisted out of them OR they're the wrong length and need to be replaced.
If the a-to-a and brace measure at spec, or if you've twisted up till the brace is more than 3/4" higher and a-to-a more than an inch shorter than spec, and you still cannot get the rated draw weight out of it, I'd send the bow back to the factory.
I will add one exception to that... and this is why I asked at the beginning if the bow has EVER drawn it's rated peak weight for you. If your bow has a cam with adjustable draw length over several inches, and if you're shooting that bow set at one of the shorter draw length adjustments for that cam, you probably will never get the bow to draw it's rated peak weight. You're simply not putting enough bend in the limbs to generate the poundage before the cam(s) roll over.
How do your brace height and axle to axle length check against the factory specs for your bow? If the a-to-a length is longer and brace height lower than they're supposed to be then either your string/cable still has some snot left to get twisted out of them OR they're the wrong length and need to be replaced.
If the a-to-a and brace measure at spec, or if you've twisted up till the brace is more than 3/4" higher and a-to-a more than an inch shorter than spec, and you still cannot get the rated draw weight out of it, I'd send the bow back to the factory.
I will add one exception to that... and this is why I asked at the beginning if the bow has EVER drawn it's rated peak weight for you. If your bow has a cam with adjustable draw length over several inches, and if you're shooting that bow set at one of the shorter draw length adjustments for that cam, you probably will never get the bow to draw it's rated peak weight. You're simply not putting enough bend in the limbs to generate the poundage before the cam(s) roll over.
#8
RE: WHAT is wrong with my bow
Another sugestion similar to Arthur's is , Put the bow in a press , remove the string and cabel , stretch them out , and twist them [or untwist them] to their factory specks , and reinstall . That should get you to the advertised brace and axil length and poundage , if your limbs have not lost strength .
#9
Nontypical Buck
Join Date: Feb 2003
Posts: 2,358
RE: WHAT is wrong with my bow
Is the draw length right, just the weight can't go higher? If so, twist BOTH the string and cables. This will raise the draw weight while keeping the draw length the same. It takes
a bunch of trial and error to get it right, especially on a two-cam to keep the cams synched, but its actually pretty easy. I did this with my wife's Thunderbolt with Maxi-HL cams that we used the cam to adjust down the length 1/2 inch. Problem was we then maxed out on poundage around 42 on 50lb limbs (with cams set to "normal" slots it maxed at 52). I marked the cams with a gel pen, twisted up both cables, twisted up the string then played with it to re-align the cams and poof, maxed it out at 47 which was perfect for her.
--Bob
a bunch of trial and error to get it right, especially on a two-cam to keep the cams synched, but its actually pretty easy. I did this with my wife's Thunderbolt with Maxi-HL cams that we used the cam to adjust down the length 1/2 inch. Problem was we then maxed out on poundage around 42 on 50lb limbs (with cams set to "normal" slots it maxed at 52). I marked the cams with a gel pen, twisted up both cables, twisted up the string then played with it to re-align the cams and poof, maxed it out at 47 which was perfect for her.
--Bob
#10
RE: WHAT is wrong with my bow
Something else to consider. If, as Arthur suggested, the bow did once reach its listed peak weight and now it doesn't then if it does not turn out to be a string/cable problem then it might be a weak limb. Most times that can only be determined at the factory.