WHAT is wrong with my bow
#11
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Colorado Springs Colorado
Posts: 143
RE: WHAT is wrong with my bow
Thank you for all the replies. I've got some information to go over now! In response to some questions: last year PSE changed out the limbs because of a cracked limb so I hope limbs aren't the issue. When I got the bow back from the factory it did go to 60#'s, but over the winter of not shooting it would only go to 54#'s cranked all the way in. That is when it was suggested that I had string/cable stretch and I bought a new string (Berry String). I have shot this bow MANY times in the past, but it is supposed to have new limbs now. You may all call me crazy, but twisting the cables DID shorten the length that I can draw the bow. I'm going to print all of your suggestions out so I can go over them one by one.
#13
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Colorado Springs Colorado
Posts: 143
RE: WHAT is wrong with my bow
Is there something that I've done concerning the cams then? All I did was press the bow and take one end of each cable off(one at a time) and twist it like 15 times. That is all I did. Now I cannot pull the string all the way back to my normal anchor. Not because of weight, but because the string won't go back any farther.
#17
Nontypical Buck
Join Date: Feb 2003
Posts: 2,358
RE: WHAT is wrong with my bow
Ok, I am going to ask two potentially VERY stupid questions, so please don't take offense:
1) when the new string went on, is it in the same slot in the vector wheels?
2) Are you sure you twisted the cables, not the string? I know it might be stupid, but twisting the cables should wrap more string onto the cam, so it would take longer draw to unwind them.
Like I said, potentially stupid, especially #2, but something flat out doesn't make sense here.
--Bob
1) when the new string went on, is it in the same slot in the vector wheels?
2) Are you sure you twisted the cables, not the string? I know it might be stupid, but twisting the cables should wrap more string onto the cam, so it would take longer draw to unwind them.
Like I said, potentially stupid, especially #2, but something flat out doesn't make sense here.
--Bob
#18
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Colorado Springs Colorado
Posts: 143
RE: WHAT is wrong with my bow
No offense taken! Yes, it is in the same slot as before and I am absolutely positive that I was twisting the cables and not the string. From what everybody is saying I am also very confused as to how I could be getting different results. Is it possible to twist so much that the cam can't roll over all the way or something?
#19
Fork Horn
Join Date: Feb 2003
Location: Brockport NY
Posts: 211
RE: WHAT is wrong with my bow
It may be worth pressing the bow again and taking both the string and cables off and either twisting or untwisting them to get them back to the factory length's. I just went through the cable twisting thing myself and twisting only the cables should make your draw longer and draw lbs. higher.
#20
Join Date: Feb 2003
Location: Illinois
Posts: 1,862
RE: WHAT is wrong with my bow
Lady:
Another thought to throw in the pot.
Did you back out your limb bolts before you pressed the bow? If not, you might have bent the riser or stressed the limbs. Are you getting a complete rollover on your cam(s)?
Another thought to throw in the pot.
Did you back out your limb bolts before you pressed the bow? If not, you might have bent the riser or stressed the limbs. Are you getting a complete rollover on your cam(s)?