![[Deleted]](https://www.huntingnet.com/forum/iconimages/technical/deleted_ltr.gif)
[Deleted]
02-22-2004, 05:50 PM
#4
Join Date: Feb 2003
Location: SC USA
Posts: 1,434
RE: Brace Height??????????
Got to get your strings and cables twisted ! No big deal......but if you can't do it yourself .........take it to a good pro-shop !!
Your cam timing is probably off too ! There are two small timing holes in your cam .........they are supposed to line up straight and be parralel to your string !
Your cam timing is probably off too ! There are two small timing holes in your cam .........they are supposed to line up straight and be parralel to your string !
02-22-2004, 06:09 PM
#6
Join Date: Feb 2003
Location: SC USA
Posts: 1,434
RE: Brace Height??????????
I'm not positive on this but .....a MQ-1 is apprx. 37" ata .........so if your brace height is on......then your ata should be close ! Example: My LX was spec'd at 35" apprx. .............but actually was 35 3/4 " exactly when my brace height was the correct 6 5/8" !! Mathews said 35 3/4 " was correct !
02-22-2004, 06:14 PM
#7
Boone & Crockett
Join Date: Feb 2003
Posts: 10,679
RE: Brace Height??????????
The brace height will vary slightly frob bow to bow as well as the ATa length. The manufacturers have a reputation of fibbing a little too so that their bows will appear for "forgiving" to some.
If the holes in your cam are lined up with your string then leave it alone.
If the holes in your cam are lined up with your string then leave it alone.
02-22-2004, 06:56 PM
#8
Nontypical Buck
Join Date: Feb 2003
Location: In Teh Garage (Rossville, GA USA)
Posts: 1,161
RE: Brace Height??????????
if your brace heighth is 1/4" short that means your a to a will be slightly longer if you put about 3 to 4 twist's in your harness and string this should get you to 7.5, however this is really a non issue
