Just Wondering
#1
Thread Starter
Join Date: Oct 2003
Location: Shiloh,IL
Posts: 83
Just Wondering
What would be better to go with,
A set up that yields 250fps with 415 grain arrow (ke 58lbs) or
A set up that yields 256fps with 390 grain arrow..(ke 57lbs)
(carbon arrows)
I am looking for any and all comments...Thank you
A set up that yields 250fps with 415 grain arrow (ke 58lbs) or
A set up that yields 256fps with 390 grain arrow..(ke 57lbs)
(carbon arrows)
I am looking for any and all comments...Thank you
#4
RE: Just Wondering
Not enough difference to worry about. Especially the speed. I dropped 40 grains on my 3-D arrows thinking that 8 fps would make a huge diffence. It only made a 1 in difference at 50 yrds. The rest of my pin gaps stayed the same. Like Arthur P said. Go with the one that shoots the best.
#7
RE: Just Wondering
Just to give the momentum guys a plug...have you checked the momentum of each arrow against the other? There is not that big of a difference in weight or speed but maybe more of a significant margin with momentum.
I would probably go with the heavier one...just to be on the safe side.
I would probably go with the heavier one...just to be on the safe side.
#8
Join Date: Feb 2003
Location: SC USA
Posts: 1,434
RE: Just Wondering
Are both arrows carbon ? Or just the lighter one ?
If the heavier of the two is an aluminum (seems light for alum.).....it's probably a fat shaft with a thin wall ! If that's the case ....I'd opt. for the carbon arrows = the smaller diameter shaft would give you better penetration and durability IMO (if that's the case) !!
If the heavier of the two is an aluminum (seems light for alum.).....it's probably a fat shaft with a thin wall ! If that's the case ....I'd opt. for the carbon arrows = the smaller diameter shaft would give you better penetration and durability IMO (if that's the case) !!