Community
Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

building A bowtech with speed???

Thread Tools
 
Old 02-06-2004, 08:03 PM
  #1  
Thread Starter
 
Join Date: Feb 2004
Posts: 20
Default building A bowtech with speed???

I own a 2003 patriot single cam set at 65 pounds. I'm shooting a 370 grain arrow at around 270fps.

unfortunetly i'm a shorty! only got a 27 inch draw length. My first question is , If I maxed my bow out, I would probably get around 280fps( 65-66 KE)
is this bow fit to take on large game?? such as elk and moose??
Secondly If it isn't fit for such large game , I need a bow that will persue large game such as moose and elk for next season. Can I build my bow somehow to beable to take larger game , If not I want to stay with the Bowtech line , so what bow could I build to get my expectations of high Ke and good speed with a small draw length of 27 inches.


thanks nick
quebecbowhunter is offline  
Old 02-06-2004, 08:07 PM
  #2  
 
Join Date: Feb 2003
Location: KY USA
Posts: 779
Default RE: building A bowtech with speed???

Your bow is just fine for any big game in No. America. Your current setup gives you 60 ft-lbs of Energy & that is just fine. The only thing I would say is to watch broadhead design & go for something that isn't mechanical on anything bigger than deer.


Good Luck
Orions_Bow is offline  
Old 02-06-2004, 08:08 PM
  #3  
Thread Starter
 
Join Date: Feb 2004
Posts: 20
Default RE: building A bowtech with speed???

thanks for the quick reply orions bow ,ya I shoot muzzy 100's

nick
quebecbowhunter is offline  
Old 02-06-2004, 09:05 PM
  #4  
Nontypical Buck
 
CLOUD 9, MN's Avatar
 
Join Date: Feb 2003
Location: St. Cloud MN USA
Posts: 1,757
Default RE: building A bowtech with speed???

Your bow is a Whitetail killing machine! Way more than enough! For big game like Elk or Moose, its just fine, just as the previous post says......don't use mechanicals (except for maybe a Rocky Mountain Snyper).

Enjoy you rig!

Good Luck!
CLOUD 9, MN is offline  
Old 02-06-2004, 09:11 PM
  #5  
Giant Nontypical
 
nubo's Avatar
 
Join Date: Feb 2003
Location: creemore Ontario Canada
Posts: 5,525
Default RE: building A bowtech with speed???

I've seen the Rocky MTN Revolution's cause some serious damage on a bull moose.

nubo
nubo is offline  
Old 02-06-2004, 09:18 PM
  #6  
 
Join Date: Feb 2003
Location: Alvo Nebraska USA
Posts: 2,057
Default RE: building A bowtech with speed???

Go with a heavier arrow, maybe try the new Axis shaft from Easton which is a small diameter shaft with good weight. Also maybe a new skinning knife and make some more friends that are in good condition for packing out heavy hind quarters
walks with a gimp is offline  
Old 02-06-2004, 09:20 PM
  #7  
Senior Member
 
Buck Magnet's Avatar
 
Join Date: Feb 2003
Location: Indiana PA USA
Posts: 3,656
Default RE: building A bowtech with speed???

Hey guys, thanks for helping Nick out here. He was over at RealTree and not too many of the guys know much about the BowTechs over there, yes, that is a sin Well, he asked me some questions and I told him to check out this place as you guys are the BowTech genious's!!
Buck Magnet is offline  
Old 02-06-2004, 09:40 PM
  #8  
Thread Starter
 
Join Date: Feb 2004
Posts: 20
Default RE: building A bowtech with speed???

thanks for leading me here Jason , its a great forum,

nick
quebecbowhunter is offline  
Old 02-06-2004, 11:10 PM
  #9  
Giant Nontypical
 
Kanga's Avatar
 
Join Date: Feb 2003
Location: Burleson TX USA
Posts: 6,455
Default RE: building A bowtech with speed???

Welcome to the boards Nick.

The Patriot will be fine for anything you want to take.

But if you are in a quest for more speed then all I can say is 2 words.

BLACK KNIGHT

I have a 28" draw and my BK set at 60lbs does the following.
314gr arrow 312 fps 68lbs KE
376gr arrow 288 fps 69lbs KE
400gr arrow 280 fps 70Lbs KE

The lower brace of the BK should not be much of a problem in your draw lenght.
Kanga is offline  
Old 02-07-2004, 06:16 AM
  #10  
 
Join Date: Nov 2003
Location:
Posts: 66
Default RE: building A bowtech with speed???

Here the figures from my Extreme VFT.

Draw 29" & 65#s.

288 grains @ 274 fps
250 grains @ 288 fps
IAKSmith is offline  


Quick Reply: building A bowtech with speed???


Contact Us - Manage Preferences - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.