Got my Dually
#13
Thread Starter
Join Date: Dec 2003
Location:
Posts: 76
RE: Got my Dually
I'll let you know...
A friend made the same comment.
If I have to get new ones, I'll see what the shops willing to do about the arrows. If their deal isn't to my liking, I'll figure out things then.
Yes...there are a dozen
A friend made the same comment.
If I have to get new ones, I'll see what the shops willing to do about the arrows. If their deal isn't to my liking, I'll figure out things then.
Yes...there are a dozen
#14
RE: Got my Dually
That's fine what ever you decide but I was planning on using the S/T Axis 400's as well so I'm definetly interested and they're the perfect length for me .
Just e-mail me when you decide .
[email protected]
nubo
Just e-mail me when you decide .
[email protected]
nubo
#16
RE: Got my Dually
ORIGINAL: ssurles268
I saw on the Bowtech Website that the Patroit Dually is 65% left off. Didn;t the dually have a 50% letoff in 2003?
I saw on the Bowtech Website that the Patroit Dually is 65% left off. Didn;t the dually have a 50% letoff in 2003?
Letoff was 65%.
Jay,
At 30" you will be smoking those arrows, and most likely will need to beef up the spine to 340 in the ST AXIS, especially fi you are still entertaining the thought of those IH 125s
#17
Thread Starter
Join Date: Dec 2003
Location:
Posts: 76
RE: Got my Dually
On the broadhead front, I'll either use the Advantage or Ironhead 100's (although my blades will also fit 75 ironheads I believe).
Plus, when it recams, if I'm at 28" arrow now, I'll be at approx 29" arrow. I think I looked at the chart before and 400's might still cut it.
In case you're wondering why the arrow lenght is coming up shorter than the draw, the way the rest is set up, it basically comes up even with the cut out window of the riser (If that makes sense...I might try to get a good picture of it tonight).
Plus, when it recams, if I'm at 28" arrow now, I'll be at approx 29" arrow. I think I looked at the chart before and 400's might still cut it.
In case you're wondering why the arrow lenght is coming up shorter than the draw, the way the rest is set up, it basically comes up even with the cut out window of the riser (If that makes sense...I might try to get a good picture of it tonight).