HuntingNet.com Forums

Go Back  HuntingNet.com Forums >
  • Archery Forums
  • Technical
    • Bow set up help >

  • Bow set up help

    • Register
    FAQ
    Community
    Calendar
    Today's Posts
    Search
    Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

    Bow set up help

    Thread Tools
     
    Old 01-29-2002, 06:24 PM
      #1  
    Thread Starter
     
    Join Date: Feb 2003
    Location: elmira ny USA
    Posts: 3
    Default Bow set up help
    I need help on how high do you set your shoot through rest. I set it just above center of the mounting holes, is this ok or should it be right on center.Thanks for the help.:d
    walter-rev is offline  
    Reply
    Old 01-29-2002, 10:10 PM
      #2  
    Fork Horn
     
    Join Date: Feb 2003
    Location: fairbanks alaska
    Posts: 144
    Default RE: Bow set up help
    walter, mine is somewhere real cloce to center if not its a little low.
    Ron
    akbowhunter is offline  
    Reply
    Old 01-30-2002, 05:40 AM
      #3  
    Fork Horn
     
    Join Date: Feb 2003
    Location: Ohio
    Posts: 134
    Default RE: Bow set up help
    I'm with akbowhunter.
    I usually set it up so the arrow is in the middle of the hole to start.Then begin the tuning process,by the time I have it grouping the way I like it ends up slightly low in the hole.
    This can very from bow to bow.
    Set it up level in the hole and begin tuning till you find the sweet spot.
    OHarcher is offline  
    Reply
    Old 01-30-2002, 05:57 AM
      #4  
     
    Join Date: Feb 2003
    Location: Miami FL USA
    Posts: 208
    Default RE: Bow set up help
    The center of the berger button hole.
    FLHunter is offline  
    Reply
    Old 01-30-2002, 06:14 AM
      #5  
    Boone & Crockett
     
    PABowhntr's Avatar
     
    Join Date: Feb 2003
    Location: Lehigh County PA USA
    Posts: 12,157
    Default RE: Bow set up help
    My shafts cross evenly across the center of the rest mounting hole as well.

    Steve,

    I forgot to tell you "thanks" for the clamps...
    PABowhntr is offline  
    Reply
    Old 01-30-2002, 08:19 AM
      #6  
    Banned
     
    Join Date: Feb 2003
    Posts: 27,585
    Default [Deleted]
    [Deleted by Admins]
    Deleted User is offline  
    Reply
    Back to Subforum
    Technical
    View Next Unread
    Best Fletching Jig for the $

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts
    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are On
    Pingbacks are On
    Refbacks are Off



    Advanced Search

    Contact Us - Manage Preferences - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

    Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.