new string new problems
#11
Typical Buck
Thread Starter
Join Date: May 2007
Location: Belgium
Posts: 996
most of the problem is solved, see pic
I did check the cable and stringlength compared to the factory ones and the new vaportrail ones were a little shorter which should be normal because of the stringwear.
I then checked the vaportrail with new bowtech factory strings and cables and they were the same.
I'm going to post of the major problem but since I went on my first hunt and shot a doe at 20 yards, I think most of my issues are gone.
I might have explained the problem wrong, so...
In the pic the cable is barely touching the hook on the cam, before the cable was almost bent over the hook.
I still want some more braceheight because the string is too close to the rubber on the centerstop ( 2008 model ).
It's biting into the rubber and it should just be touching it gently.
My bow just makes a little too much noise for long shots I think
I then checked the vaportrail with new bowtech factory strings and cables and they were the same.
I'm going to post of the major problem but since I went on my first hunt and shot a doe at 20 yards, I think most of my issues are gone.
I might have explained the problem wrong, so...
In the pic the cable is barely touching the hook on the cam, before the cable was almost bent over the hook.
I still want some more braceheight because the string is too close to the rubber on the centerstop ( 2008 model ).
It's biting into the rubber and it should just be touching it gently.
My bow just makes a little too much noise for long shots I think