Octane Hostage Pro Help!!
#1
Octane Hostage Pro Help!!
Hey All,
I was shooting the admiral today and noticed the bristles on the left side of my octane are really worn down.
On further inspection each of my arrows had red streaks on the left side of the kock vanes from the bristles.
The nocks on my arrows appear to align with the kock vane so I am not sure why they would be brushing.
Any ideas? Would being underspined cause these issues? I am shooting Beman MFX 400s at 28.5 Draw and 65lbs.
The arrows have 2" blazers with a slight right helical.
Thanks for the help.
Wayne.
I was shooting the admiral today and noticed the bristles on the left side of my octane are really worn down.
On further inspection each of my arrows had red streaks on the left side of the kock vanes from the bristles.
The nocks on my arrows appear to align with the kock vane so I am not sure why they would be brushing.
Any ideas? Would being underspined cause these issues? I am shooting Beman MFX 400s at 28.5 Draw and 65lbs.
The arrows have 2" blazers with a slight right helical.
Thanks for the help.
Wayne.
Last edited by stickler; 09-24-2009 at 05:50 PM.
#2
At my local bowshop people have been pitchin a yip over these rests.The bristles just plain suck! If your getting contact from your arrow then it could be a number of reasons. Check the center shot to see if its the culprit, then I would check tiller.