Issue with my Limb Driver
03-12-2009, 01:14 PM
#11
Giant Nontypical
Join Date: Feb 2003
Location: HENDERSON KY USA
Posts: 6,634
RE: Issue with my Limb Driver
A friend of mine had the exact same issue as you.He took it by the tru ball booth at one of the ASA shoots and with 1 glance,the person said it was adjusted wrong.He adjusted the top screw back in and readjusted the screw on the back and then reset the top screw and it was fine.Took him about 2 minutes.
03-12-2009, 08:36 PM
#12
Nontypical Buck
Join Date: Mar 2008
Location: Henderson, KY
Posts: 1,760
RE: Issue with my Limb Driver
ORIGINAL: TFOX
A friend of mine had the exact same issue as you.He took it by the tru ball booth at one of the ASA shoots and with 1 glance,the person said it was adjusted wrong.He adjusted the top screw back in and readjusted the screw on the back and then reset the top screw and it was fine.Took him about 2 minutes.
A friend of mine had the exact same issue as you.He took it by the tru ball booth at one of the ASA shoots and with 1 glance,the person said it was adjusted wrong.He adjusted the top screw back in and readjusted the screw on the back and then reset the top screw and it was fine.Took him about 2 minutes.
03-13-2009, 06:17 PM
#13
Giant Nontypical
Join Date: Feb 2003
Location: HENDERSON KY USA
Posts: 6,634
RE: Issue with my Limb Driver
ORIGINAL: drockw
that is what is happening to one of my buddies (Scott). He has a 360 though and the adjustment screw seems to keep working its way out.
ORIGINAL: TFOX
A friend of mine had the exact same issue as you.He took it by the tru ball booth at one of the ASA shoots and with 1 glance,the person said it was adjusted wrong.He adjusted the top screw back in and readjusted the screw on the back and then reset the top screw and it was fine.Took him about 2 minutes.
A friend of mine had the exact same issue as you.He took it by the tru ball booth at one of the ASA shoots and with 1 glance,the person said it was adjusted wrong.He adjusted the top screw back in and readjusted the screw on the back and then reset the top screw and it was fine.Took him about 2 minutes.
Many people adjust the top screw when the back screw is not adjusted properly,putting it out of sinc.It didn't back out on him,he just adjusted it wrong.
03-13-2009, 07:31 PM
#15
Giant Nontypical
Join Date: Feb 2003
Location: HENDERSON KY USA
Posts: 6,634
RE: Issue with my Limb Driver
ORIGINAL: MeanV2
Can cure lots of problems![8D]
Dan
ORIGINAL: Cougar Mag
Solution: L O C T I T E
Solution: L O C T I T E
Dan
Can cause a few as well.
Don't let it touch some plastics.Also,don't use red.[8D]
03-13-2009, 07:44 PM
#16
Giant Nontypical
Join Date: Jun 2007
Location:
Posts: 7,367
RE: Issue with my Limb Driver
I didn't know there was anybody in the Archery world that ever used Red.
I used to Loctite everything on my Bow back in the Hatchet Cam days. I don't any more and hardly ever have any problem with anything loosening up, but if I do the little blue tube is always close by.
Dan
I used to Loctite everything on my Bow back in the Hatchet Cam days. I don't any more and hardly ever have any problem with anything loosening up, but if I do the little blue tube is always close by.
Dan
