What the.....?!?!?
#1
Thread Starter
Join Date: Feb 2003
Location: North East Illinois
Posts: 140
What the.....?!?!?
I' m in need of some help. I am trying to get my bow paper tuned and it is just not going right!
I have a low tear that wont go away. I tried moving the string nock down, and it only got worse. So, I nocked my arrow above the brass nock, and the tear was almost perfect. So, I moved the string nock up to that spot......and now I have a low tear again.[:@][:@][:' (]
My vane tears are perfect, so I am inline, just this stinking low tear. My arrow flight shows that something is wrong.
Any help, please??
I have a low tear that wont go away. I tried moving the string nock down, and it only got worse. So, I nocked my arrow above the brass nock, and the tear was almost perfect. So, I moved the string nock up to that spot......and now I have a low tear again.[:@][:@][:' (]
My vane tears are perfect, so I am inline, just this stinking low tear. My arrow flight shows that something is wrong.
Any help, please??
#2
Nontypical Buck
Join Date: Feb 2003
Location:
Posts: 2,994
RE: What the.....?!?!?
Hence, the ping...
I' d contact bowdoodle and ask them. Perhaps it' s a situation related to the zapper. Sounds like the upper launcher arm is too strong, not flexible enough, and is forcing the arrow down upon release and producing the ping.
I' d contact bowdoodle and ask them. Perhaps it' s a situation related to the zapper. Sounds like the upper launcher arm is too strong, not flexible enough, and is forcing the arrow down upon release and producing the ping.
#6
Join Date: Mar 2003
Location:
Posts: 169
RE: What the.....?!?!?
Reset the nocks and make sure its level.... Also check the release and make sure it is releasing smooth.... Last year my release was catching on one side because the spring was set to tight.... make sure it has a smooth opening and not delayed
#8
Thread Starter
Join Date: Feb 2003
Location: North East Illinois
Posts: 140
RE: What the.....?!?!?
I do have an eliminator button in place. I am shooting a Golden Eagle Pro Formula 3D, 65 lbs with Easton CarbonAeros 400s. 27 1/4" long with a 30 inch draw.
I am hoping to get out and shoot on Sunday and I will try moving the nock up more.
I am hoping to get out and shoot on Sunday and I will try moving the nock up more.
#10
Join Date: Apr 2003
Location: Westfield Ctr. OH
Posts: 7
RE: What the.....?!?!?
First get rid of the brass nock set tie in a string nock set . Next move nock set up for tears that go down . Look to see if the vanes are coming into contact with rest . I problem that I have had in the past that the brass nock set starts to eat up the plastic nock and deforms it after a while.