Insert Problem
09-12-2008, 08:52 PM
#1
Typical Buck
Thread Starter
Join Date: Feb 2003
Location: Ontario,NY USA
Posts: 509
Insert Problem
I am looking for an insert that is .284" diameter . How can I find a chart that will give me the dimensions of inserts . ? I did a several searchs and came up with nothing .
09-13-2008, 12:04 PM
#3
Typical Buck
Thread Starter
Join Date: Feb 2003
Location: Ontario,NY USA
Posts: 509
RE: Insert Problem
The arrow is a Arrow dynamics Nitro Stinger . It is a tapered arrow . I would think the Easton aluminum arrows would have some sort of selection and there are several diameter sizes ............
09-13-2008, 04:07 PM
#4
Typical Buck
Join Date: Mar 2005
Location: (39.02N -95.68W)
Posts: 533
RE: Insert Problem
Yeah, I know that shaft well. They are made about 2 miles from my house here in Topeka, KS.
You can get Nitro Stinger inserts easiest here: http://www.lancasterarchery.com/shop/product_info.php?manufacturers_id=27&products_ id=1556&osCsid=da9d52e6467f29c1634642e99de32d2 9
Arrow Dynamics has lost their domain, so their website is no longer active so, if you run in to problems, you can use this number to contact them during business hours: (785) 233-9541
You can get Nitro Stinger inserts easiest here: http://www.lancasterarchery.com/shop/product_info.php?manufacturers_id=27&products_ id=1556&osCsid=da9d52e6467f29c1634642e99de32d2 9
Arrow Dynamics has lost their domain, so their website is no longer active so, if you run in to problems, you can use this number to contact them during business hours: (785) 233-9541
09-13-2008, 08:26 PM
#5
Typical Buck
Thread Starter
Join Date: Feb 2003
Location: Ontario,NY USA
Posts: 509
RE: Insert Problem
Thanks Snood . I was on their site about a week ago and like you said , it's gone . I thought it might be easier and cheaper if there was an Easton Insert that i could purchase locally . I had to go online to buy the darned nocks as I have been breaking them .
09-18-2008, 09:14 PM
#6
Typical Buck
Thread Starter
Join Date: Feb 2003
Location: Ontario,NY USA
Posts: 509
RE: Insert Problem
Went to Gander Mt today asI was in the area . The fellow in the archery dept looked through three boxes of assorted inserts . I had taken a cutoff piece from one of my arrows . The insert for the 2013 worked real slick . Thanks Gander Mountain !
