Question about Hoyt Accuwheel.....
03-05-2003, 11:31 AM
#1
Thread Starter
Join Date: Feb 2003
Location: Ridgeland MS USA
Posts: 850
Question about Hoyt Accuwheel.....
I' m thinking of putting the accuwheel on my ProTec. I currently have the versa cam on and I' m wondering if the accuwheel would be a more forgiving cam. Thanks for any info.
03-05-2003, 12:07 PM
#2
Boone & Crockett
Join Date: Feb 2003
Location: Lehigh County PA USA
Posts: 12,157
RE: Question about Hoyt Accuwheel.....
Definitely more forgiving. The Versacam is considered a hard cam because of its draw cycle and, subsequently, the amount of energy it helps to store. The Accuwheel is considered either a round wheel or energy wheel and offers a much smoother draw cycle than the Versacam. About the only complaint that I have heard about it is that the backwall can be a little soft at times.
Hope this helps.
Hope this helps.
03-05-2003, 12:17 PM
#3
Giant Nontypical
Join Date: Feb 2003
Posts: 9,175
RE: Question about Hoyt Accuwheel.....
Accuwheels are very forgiving but they ain' t just a little soft. They' re VERY soft on the back wall. Like drawing into a sponge. Accuwheels are my favorite cam for fingers shooting, but I' d rather have Command Cams or the new Cam 1/2 for release shooting.
