Community
Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

Draw Length HELP

Thread Tools
 
Old 07-18-2008, 07:18 PM
  #1  
Bartender
Thread Starter
 
peakrut's Avatar
 
Join Date: Feb 2003
Location: Wisconsin
Posts: 6,634
Default Draw Length HELP

Ok I own a 1999 Hoyt Magnatec redline HL, Well I was doing some research and found this"
http://www.hoyt.com/customer_service/hoyt_tune_charts.php?page=99_magnatec.php

For the redline HL with 93 string length and 34 buss cable the max draw I can have is 27.
I looked at my bow and on the cam highest number is 3 which is 27.
My damn draw length is 29 and all these years ive been way off. I actually had him shorten it 2 years ago
because I thought it was to long but it turns out not even close. (Pro Shop)
Am I correct by reading the link above?


T
peakrut is offline  
Old 07-18-2008, 08:19 PM
  #2  
Giant Nontypical
 
buckeye's Avatar
 
Join Date: Aug 2003
Location: The OH-IO
Posts: 7,103
Default RE: Draw Length HELP

It shows 28 inches is the longest DL you can have with those strings and cables.... Are you sure your bow only has 3 pegs rather than 4 to adjust your DL? Either way even if it did, if your DL is 29 it is still an inch short.

It was very obvious as we talked about at the GTG that your DL was way short....
buckeye is offline  
Old 07-18-2008, 08:21 PM
  #3  
Boone & Crockett
 
Rob/PA Bowyer's Avatar
 
Join Date: Oct 1998
Location: Hughesville, PA USA
Posts: 18,322
Default RE: Draw Length HELP

Tony if I read your post right and the link provide right you saying 3 is 27" draw but I read the link as 3 is for 29, 30 or 31 depending on your module.

Are you saying your a 27" draw or the bow is a 27" draw you it should be a 29" to fit you?
Rob/PA Bowyer is offline  
Old 07-18-2008, 08:28 PM
  #4  
Bartender
Thread Starter
 
peakrut's Avatar
 
Join Date: Feb 2003
Location: Wisconsin
Posts: 6,634
Default RE: Draw Length HELP

I am 29 DL but my cam is set at #3 and that link show #3 as 27. I dont see a #4 on my bow.
Rob I am not sure how you see it as 29, 30, or 31?
Yeah buckeye that is why I started investigating and I do thank you much.



Redline
Redline HL
75
4 lb 6 oz
37 1/4
6 7/8
93
34

1
25 DL
258-263
296-301

2
26
271-276
205-210

3
27
281-286
213-218

4
28
290-295
220-225

37 1/4
7
95.5
34.5
5
29
293-298
222-227

6
30
303-308
231-236

7
31
310-315
236-241

37 5/8
6 7/8
97.5
35
8
32
319-324
243-248

T
peakrut is offline  
Old 07-18-2008, 08:30 PM
  #5  
Boone & Crockett
 
Rob/PA Bowyer's Avatar
 
Join Date: Oct 1998
Location: Hughesville, PA USA
Posts: 18,322
Default RE: Draw Length HELP

I'm not seeing that, when I click the link and then choose 99 Magnatech, a different window opens.

LOL, now I see, I didn't scroll down, I opened another window by choose 99 year and the Magnatech for model. My bad.

Rob/PA Bowyer is offline  
Old 07-18-2008, 08:34 PM
  #6  
Bartender
Thread Starter
 
peakrut's Avatar
 
Join Date: Feb 2003
Location: Wisconsin
Posts: 6,634
Default RE: Draw Length HELP

LOL Its all good buddy.
Now I have bow in hand and on one side of the cam labeled redline the string is looped around 1.
If I turn the bow over its looped around 3 all the same peg.
I am going to try and post a pic, brb
peakrut is offline  
Old 07-18-2008, 08:42 PM
  #7  
Giant Nontypical
 
MeanV2's Avatar
 
Join Date: Jun 2007
Location:
Posts: 7,367
Default RE: Draw Length HELP

Did you try to measure to see what the actual draw length of the bow is?

Regardless of charts, etc. It is what it is!

Dan
MeanV2 is offline  
Old 07-18-2008, 08:43 PM
  #8  
Boone & Crockett
 
Rob/PA Bowyer's Avatar
 
Join Date: Oct 1998
Location: Hughesville, PA USA
Posts: 18,322
Default RE: Draw Length HELP

Man Tony, I wish I would have kept all my manuals and stats sheets from all those years with Hoyts.
Rob/PA Bowyer is offline  
Old 07-18-2008, 08:45 PM
  #9  
Bartender
Thread Starter
 
peakrut's Avatar
 
Join Date: Feb 2003
Location: Wisconsin
Posts: 6,634
Default RE: Draw Length HELP

That will be my next step Dan, Anyway of doing this easily with just me and the wife?
See that hole under the 2, use to be a peg possibly?



peakrut is offline  
Old 07-18-2008, 09:12 PM
  #10  
Bartender
Thread Starter
 
peakrut's Avatar
 
Join Date: Feb 2003
Location: Wisconsin
Posts: 6,634
Default RE: Draw Length HELP

http://www.hoyt.com/customer_service/hoyt_tune_charts.php?page=99_magnatec.php
Scroll down Kev and you will see redline HL on this link.
93 string and 34 buss.
peakrut is offline  


Quick Reply: Draw Length HELP


Contact Us - Manage Preferences - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.