Bowtech Guys...And non-bowtech...cable stop issue
#11
RE: Bowtech Guys...And non-bowtech...cable stop issue*UPDATED*
Alright, I've had a few requests to see how my cables are sitting at the roller guard. I went ahead and switched them to see if it made a difference, and the cable still sits in the draw stop channel crooked. Here is a picture of my bow how it sits right now. Remember, I JUST switched the order of the cables, so is this correct or incorrect?
I was still having the same issue when I had the green cable on the outside roller, so it didn't make a difference. I've also attached a picture of my top cam looking down at it when the bow is at rest. You can see how the cable is tracking offcenter from the cable stop.
I'm pretty much at a loss right now, so any help would be appreciated. I'm about to the point where I'm taking to a local shop, seeing if they can fix it, then just selling it (but I have to have the issue resolved first). Thanks guys.
I was still having the same issue when I had the green cable on the outside roller, so it didn't make a difference. I've also attached a picture of my top cam looking down at it when the bow is at rest. You can see how the cable is tracking offcenter from the cable stop.
I'm pretty much at a loss right now, so any help would be appreciated. I'm about to the point where I'm taking to a local shop, seeing if they can fix it, then just selling it (but I have to have the issue resolved first). Thanks guys.
#13
RE: Bowtech Guys...And non-bowtech...cable stop issue*UPDATED*
ORIGINAL: bowtechben
HUH??? Why?
then just selling it
HUH??? Why?
Edit...Ben, could you do me a HUGE favor? Could you check your cables and where they run in the roller guard wheels and see if my picture above is correct or incorrect? Thanks bud.
#14
RE: Bowtech Guys...And non-bowtech...cable stop issue*UPDATED*
I hate to pledge another guy's time to ya...but maybe its time to send a pm to our private shop? More than likely, you will still learn a ton by working it out with him? I hate to see a guy struggle and get down anything archery. If I had the know how, I would gladly have been there a week ago. Stick with it bud.
#15
RE: Bowtech Guys...And non-bowtech...cable stop issue*UPDATED*
ORIGINAL: bowtechben
I hate to pledge another guy's time to ya...but maybe its time to send a pm to our private shop? More than likely, you will still learn a ton by working it out with him? I hate to see a guy struggle and get down anything archery. If I had the know how, I would gladly have been there a week ago. Stick with it bud.
I hate to pledge another guy's time to ya...but maybe its time to send a pm to our private shop? More than likely, you will still learn a ton by working it out with him? I hate to see a guy struggle and get down anything archery. If I had the know how, I would gladly have been there a week ago. Stick with it bud.
#16
RE: Bowtech Guys...And non-bowtech...cable stop issue*UPDATED*
ORIGINAL: MGH_PA
I was going to, I just don't see him post much lately, so I assumed he was busy, but I'll send him a pm.
ORIGINAL: bowtechben
I hate to pledge another guy's time to ya...but maybe its time to send a pm to our private shop? More than likely, you will still learn a ton by working it out with him? I hate to see a guy struggle and get down anything archery. If I had the know how, I would gladly have been there a week ago. Stick with it bud.
I hate to pledge another guy's time to ya...but maybe its time to send a pm to our private shop? More than likely, you will still learn a ton by working it out with him? I hate to see a guy struggle and get down anything archery. If I had the know how, I would gladly have been there a week ago. Stick with it bud.
I was going to, I just don't see him post much lately, so I assumed he was busy, but I'll send him a pm.
#17
RE: Bowtech Guys...And non-bowtech...cable stop issue*UPDATED*
MGH...I just looked at my 101 and it doesn't look any different than yours, except it's right handed. I think you may be worrying about nothing really.
Mine looks to come off at about the same angle as yours. My brown cable is on the inside roller and the green outside. Your looks opposite which makes sense on a left handed bow. Did you call Bowtech? They are very good at helping people work through their concerns. Maybe they can put your mind at ease. I used to nit pick every detail on my bows and found out that I was usually making a mountain from a mole hill.
Doug
Mine looks to come off at about the same angle as yours. My brown cable is on the inside roller and the green outside. Your looks opposite which makes sense on a left handed bow. Did you call Bowtech? They are very good at helping people work through their concerns. Maybe they can put your mind at ease. I used to nit pick every detail on my bows and found out that I was usually making a mountain from a mole hill.
Doug
#18
RE: Bowtech Guys...And non-bowtech...cable stop issue*UPDATED*
Just got off the phone with tech support. After explaining my issue to him, he believes there's probably excessive twist in the limb. He told me to get in contact with my local dealer, and have him call it in. The problem here is I bought the bow used from a guy on AT. The guy sent the warranty card to me, but never had it filled out, so can I still fill that and utilize the factory warranty or no?