PABowhunter' s Technical Reviews?
03-01-2003, 10:20 AM
#31
Boone & Crockett
Join Date: Feb 2003
Location: Lehigh County PA USA
Posts: 12,157
RE: PABowhunter' s Technical Reviews?
1. The Redline cam was designed like the earlier Mathews maxcams. It does not have the rotating draw length module or the draw stop peg like the Versacam either.
2. You could adjust draw length a half inch up and down from the original setting. So, a 29 inch draw bow would go up to 29.5 and down to 28.5.
3. Right on initially but two of the replacement strings that I put on the bow had alot of creep to them so it stretched about a half of an inch. I only had two Redline bows that I can think of ...the Havoc and a ' 99 Magnatec.
4. That would have been a pretty darn good price assuming the bow was in good condition. I am sure you will find another as there are Havocs of one form or another popping up on Ebay periodically.
Hope this helps.
2. You could adjust draw length a half inch up and down from the original setting. So, a 29 inch draw bow would go up to 29.5 and down to 28.5.
3. Right on initially but two of the replacement strings that I put on the bow had alot of creep to them so it stretched about a half of an inch. I only had two Redline bows that I can think of ...the Havoc and a ' 99 Magnatec.
4. That would have been a pretty darn good price assuming the bow was in good condition. I am sure you will find another as there are Havocs of one form or another popping up on Ebay periodically.
Hope this helps.
