looking into buying a fletching jig..
#11
Giant Nontypical
Join Date: Dec 2004
Location: Ohio
Posts: 7,876
RE: looking into buying a fletching jig..
Been using a bpe for years, it's done the job. The all metal bitz, *metal* is better. I haven't had a problem keeping the glue off my non metal jig though.
I have the straight and right clamp. I've done both and see no difference in either except that contact issues are more prone to happen with an off set. I do all straight now. Some think/need the off set to make the arrow spin more in flight and it supposedly causes the group to be better.
I see the bitz is a good blazer jig if your into them.
I have the straight and right clamp. I've done both and see no difference in either except that contact issues are more prone to happen with an off set. I do all straight now. Some think/need the off set to make the arrow spin more in flight and it supposedly causes the group to be better.
I see the bitz is a good blazer jig if your into them.
#13
Join Date: Sep 2005
Location:
Posts: 265
RE: looking into buying a fletching jig..
Bohning Jig
$30, super easy to use.
Just bought a bitz, and I've fletched arrows for quite a while, and I still can't use it very well yet.
Bitz is definately more well made and would last longer, but i've used the bohning for 2 years, but it's about on it's leg.
bitz is the better jig, but i'd highly recommend starting off with the bohning. hope this helps.
$30, super easy to use.
Just bought a bitz, and I've fletched arrows for quite a while, and I still can't use it very well yet.
Bitz is definately more well made and would last longer, but i've used the bohning for 2 years, but it's about on it's leg.
bitz is the better jig, but i'd highly recommend starting off with the bohning. hope this helps.
#17
Typical Buck
Join Date: Feb 2003
Location: Delaware OH USA
Posts: 534
RE: looking into buying a fletching jig..
I bought the JoJan. I like it well enough, but it had to be fitted to provide a fairly precise fit. I wish it were tighter out of the box. It seems like the magnet type would provide a more exact position to the jig. Still, I can make good arrows with this. Quality fletching can be done with this jig.
If I were to do it again, I think I might look at some of the plastic fletchers. The trouble is some have a reputation for the magnet being too weak. Not sure which is best.
I hear the Bitz is best. Probably is, but it's expensive.
The JoJan mono seems to be a good compromise.
I would reccomend a single vane fletcher. With super glue, drying time is just a few minutes between vanes, only a few seconds of working time.
BTW. . Super glue and many super duper fast set fletching glues are the same, except price! Also $3 5 min epoxy works well on inserts. That tip is worth afew bucks. Might allow you to bump up to the JoJan or the Bitz.
If I were to do it again, I think I might look at some of the plastic fletchers. The trouble is some have a reputation for the magnet being too weak. Not sure which is best.
I hear the Bitz is best. Probably is, but it's expensive.
The JoJan mono seems to be a good compromise.
I would reccomend a single vane fletcher. With super glue, drying time is just a few minutes between vanes, only a few seconds of working time.
BTW. . Super glue and many super duper fast set fletching glues are the same, except price! Also $3 5 min epoxy works well on inserts. That tip is worth afew bucks. Might allow you to bump up to the JoJan or the Bitz.
#18
RE: looking into buying a fletching jig..
I use loctite suger glue gel to put on my fletchings (someone please tell me if I am wrong for doing this) and it seems to work fine...Ive never had any problems with it
I remove my fletchings with a plain ole razor blade...there are tools out there made specifically for this job but they can be expensive and the razor blade works just fine...just take you time and make sure you do it right
I remove my fletchings with a plain ole razor blade...there are tools out there made specifically for this job but they can be expensive and the razor blade works just fine...just take you time and make sure you do it right
#20
RE: looking into buying a fletching jig..
And I use the fletch tite platinum fletching glue by bohning. Works very well but make sure it dries properly and the it isn't too humid or else after a few shots you vanes will fly off your arrow. I also recomend sanding your shafts down with a very soft sand paper and then clean it with denatured alcohool. That is what I do and I haven't had any vanes fly off.
EDIT: When putting in your inserts I recomend heating up your insert with a propane torch and take a glue stick and melt some glue on the tip. Then if you need your insert just reheat you field tip and pull out your insert.
EDIT: When putting in your inserts I recomend heating up your insert with a propane torch and take a glue stick and melt some glue on the tip. Then if you need your insert just reheat you field tip and pull out your insert.