Bow not reaching peak DW
#11
RE: Bow not reaching peak DW
Is the ATA in spec?
If so, then it's probably the scale or possibly weak limbs (not likely though).
If the ATA is longer than spec, then yourcables have stretched and they need to be twisted up again.
If so, then it's probably the scale or possibly weak limbs (not likely though).
If the ATA is longer than spec, then yourcables have stretched and they need to be twisted up again.
#13
Giant Nontypical
Join Date: Dec 2004
Location: Ohio
Posts: 7,876
RE: Bow not reaching peak DW
ORIGINAL: TEmbry
I guess while I am at it I'll go ahead and throw out another question, My bow is set at 65% let off, what is the down side of switching it to 75%? There has to be a down side to less holding weight, I'm to narrow minded to spot it though.[&:]
I guess while I am at it I'll go ahead and throw out another question, My bow is set at 65% let off, what is the down side of switching it to 75%? There has to be a down side to less holding weight, I'm to narrow minded to spot it though.[&:]