Working with aluminum shafts - ?
#11
Join Date: Feb 2006
Location: Kodiak, AK
Posts: 2,877
RE: Working with aluminum shafts - ?
If you've got a case deburring/camfering tool for reloading these are the best for deburring arrows but I wouldn't spend much on a specialty tool for deburring them if you don't have one. You can partially insert an insert and when you pop it back out the burr will come with it, then go about installing it as usual.
#13
Giant Nontypical
Join Date: Feb 2003
Posts: 9,175
RE: Working with aluminum shafts - ?
I just use an elcheapo pocketknife with a semi dull edge on a thin, small bladeto deburr my shafts. Whatever you use, make sure not to cut away more than 1/2 the shaft's wall thickness. If you cut too much of a chamfer, it will serve as a funnel to run the insert straight up inside the shaft andruin your prized arrowthe first time you hit something hard.
That's why I use a knife instead of a fancy deburring tool. I can lay the blade down flat on the inside of the shaftto cut away only the burr and still leave the full wall thickness to ride on the shoulder of the insert.
That's why I use a knife instead of a fancy deburring tool. I can lay the blade down flat on the inside of the shaftto cut away only the burr and still leave the full wall thickness to ride on the shoulder of the insert.
#14
RE: Working with aluminum shafts - ?
ORIGINAL: Arthur P
I just use an elcheapo pocketknife with a semi dull edge on a thin, small bladeto deburr my shafts.
I just use an elcheapo pocketknife with a semi dull edge on a thin, small bladeto deburr my shafts.
ORIGINAL: Arthur P
Whatever you use, make sure not to cut away more than 1/2 the shaft's wall thickness. If you cut too much of a chamfer, it will serve as a funnel to run the insert straight up inside the shaft andruin your prized arrowthe first time you hit something hard.
Whatever you use, make sure not to cut away more than 1/2 the shaft's wall thickness. If you cut too much of a chamfer, it will serve as a funnel to run the insert straight up inside the shaft andruin your prized arrowthe first time you hit something hard.