PABowhntr

Rockslinger,

You can actually take your fingernails and push the serving back together to the original position with a little time and effort. Some single cam designs exhibit this more than others. In the past I have known individuals to have that particular serving area reserved with a narrower diameter serving material. That seemed to remedy the issue if memory serves me.

BowTech_Shooter

It sounds to me like the draw stop may not beproperly adjusted. With the DUP#2 mod for 29", the draw stop should be set at approx. the 8.0 mark.

rock_slinger

Thanks for the info. Is there a chart for these adjustments? I would be really interested in that. I will check to see if that is where it is when I get home.

Greg / MO

If someone else doesn't post it before I do, I'll try to throw one up... it's on my home pc hard drive and I'm out on the road with my laptop.

rock_slinger

..