Paul L Mohr

Then I would ditch the loop.

Paul

millerhunter13

how would i do that, like what would i put the release on? just the string.

whitetailbowhunter

That's right. that's what i used to do.


Mat

millerhunter13

how should i take off the d-looP?

would i use these as a nocksets and would i have to serve them?

http://i202.photobucket.com/albums/aa101/millerhunter13/100_4157.jpg

millerhunter13

can anyone tell me?

Paul L Mohr

If I were you I wouldn't do it all. I would find a good shop and ask them if they think your draw length is good. Preferably a shop that knows something about form and shooting. You may not be able to adjust the cams any lower but you can always shorten the draw length on a bow, even if you have to twist up the string or something.

We can only tell so much from pictures, you really need to have someone watch you shoot. Have somebody competent watch you shoot and then go from there with any adjustments. A shop should be able to take the loop off in a matter of minutes. It may require you to re tune your bow though. But honestly I wouldn't worry about tuning it until you get the other issues worked out and can shoot consistently.

What we see in your pictures could be miss leading to us. A person that can show you what is wrong in person may watch you shoot and tell you everything is good enough. Especially considering you are still growing.

Remember, it doesn't have to perfect, you just have to do it the same exact way every time. When I started out my set up was similar to yours and I could still shoot pretty darn well because I practiced a lot.

I honestly think at this point you need personal help and need to go somewhere to get it. I think we are just confusing you more with each post.

Paul

millerhunter13

not not really now i am alittle screwd up now cause i took the D loop off[:@]but i will go the the shop hopefully this weekend or sooner maybe and get a new D loop put on and try to get my Draw length shortend.

millerhunter13

and ask about my form too.

Paul L Mohr

You really took it off already[]. I knew I shouldn't have said anything after I posted it.

Putting a loop on doesn't change the bows draw length, but it does change your percieved draw length, just as using a longer or shorter release will.

Shooting off the string may also change your anchor points slightly.

What ever you do it will feel weird to begin with.

Good luck,
Paul

millerhunter13

thanks i am gonna get it put on again but i am gonna have them make it shorter. that is ok, that gives me an excuse to go to the proshop.