Bow tuning advice needed.

Reply Subscribe

Thread Tools

01-23-2003, 12:47 AM

jasperv

Thread Starter

Join Date: Feb 2003

Location: kmp sa RSA

Posts: 5

Bow tuning advice needed.

Does your nocked arrow have to be 90 degrees with you string??

01-23-2003, 01:40 AM

BOWFANATIC

Nontypical Buck

Join Date: Feb 2003

Location: Wisconsin

Posts: 3,903

RE: Bow tuning advice needed.

Normally the nock point is set between 1/8" and 1/4" high.

[img]http://www.whitetails.com/00deer21.gif">
>>>---Doug--->

Edited by - bowfanatic on 01/23/2003 02:43:44

01-23-2003, 09:33 AM

Arthur P

Giant Nontypical

Join Date: Feb 2003

Posts: 9,175

RE: Bow tuning advice needed.

You certainly don't want the arrow to be below square.

01-23-2003, 03:37 PM

pup

Join Date: Feb 2003

Location: chewelah wa USA

Posts: 579

RE: Bow tuning advice needed.

i always here people say 1/4 high but dose that meen nock= 1/4 high or point 1/4 high

peta SUCKS

01-23-2003, 04:30 PM

Arthur P

Giant Nontypical

Join Date: Feb 2003

Posts: 9,175

RE: Bow tuning advice needed.

They mean putting the nockset so that the bottom of the arrow's nock is 1/8" - 1/4" above square. That assumes the bow's tiller is correct. I've seen quite a few bows where they paper tune and the nock winds up below square. When that happens, or when the nockset has to be way too high to get good flight, the tiller needs adjustment.

Edited by - Arthur P on 01/23/2003 17:31:33