? about peep sight
09-20-2007, 06:12 PM
#1
Typical Buck
Thread Starter
Join Date: Nov 2004
Location: Camden, SC
Posts: 553
? about peep sight
I have a meta peep sight and I have a problem with it sliding on my string. My question is what can I do to help with the sliding? It is tied but it still slides. Someone please help.
09-20-2007, 09:26 PM
#3
Nontypical Buck
Join Date: Feb 2003
Location: Middletown PA United States
Posts: 3,625
RE: ? about peep sight
You want the honest truth? If the peep can move then your string doesn't have near enough twists in it. Since I started getting aftermarket strings I've come to realize most factory strings should have about 5 times as many twists as they do. Of course that would make them pretty short in the end, which just proves they aren't made right in the first place.
My strings come with a twist about every 1 1/2". Put a peep in and this gets divided in half so there is only about 3/4" gap on each side so no tying is necessary. And I have a Meta peep, Fletcher and Superball. All get the same treatment---nothing.
My strings come with a twist about every 1 1/2". Put a peep in and this gets divided in half so there is only about 3/4" gap on each side so no tying is necessary. And I have a Meta peep, Fletcher and Superball. All get the same treatment---nothing.
Thread
Thread Starter
Forum
Replies
Last Post
CharlieNY
Archery Gear
2
10-17-2006 01:16 PM
