Center shot on a Bowtech Old Glory
#11
Nontypical Buck
Join Date: Feb 2007
Location: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
Posts: 2,188
RE: Center shot on a Bowtech Old Glory
That'sa good pointKodiak. My Allegiance is set-up with the center at the top of the hole and shoots darts with the QAD drop away rest.
#13
Join Date: Sep 2007
Posts: 77
RE: Center shot on a Bowtech Old Glory
My statement is not wrong bro....The burger buton hole you guys are refering to is the prime vertical location for the arrow rest designed for a particular bow.....it is not refered to as the "Center Shot" because it's NOT in the center........The term center shot ismost commonly used in reference to a left or rightof string center to limb/riser ratio. The verical adjustment for the arrow restcan vary depending on the design of the bow a lot.There are many different designs. Measure your "burger button hole" from each end of your bow axle, or from each end of the limb tip of a recurve.....i believe you'll find the rest mounting hole, or burger button hole, if you so choose,is located quite a bit higher than center....I have never heard of a "Vertical center shot" and ihave 17 yearsin archery this year, and have done a lot of fine tuning and rebuilding compound bows. i've just got started into building traditional bows this last year. Boythat has been an education! I've only scratched the surface on the bowyers trade, it's fasinating ....thehistory of archery itself is something i never studied before untill researching traditional bows....Great sport we have here! Kirk
Please excuse my spelling here....i'm a great carpenter, a lousy journalist.....
Please excuse my spelling here....i'm a great carpenter, a lousy journalist.....
#14
Join Date: Sep 2007
Posts: 77
RE: Center shot on a Bowtech Old Glory
You are right on the money Dan....the location of that hole was factored into the engineering of the bow design using even tiller adjustments. it's typically located a couple inches or more above center of the bow axle to axle,,,,But some bows perform better with the tiller adjustment a tad forward on the lower limb. thiswill effect the exact location of your rest elevation and string knock. a tad bit higher seems to be the ticket......In any case this burger button hole you guys are refering to is not the in the center of the bow....Kirk
#15
Nontypical Buck
Join Date: Feb 2007
Location: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
Posts: 2,188
RE: Center shot on a Bowtech Old Glory
Bro, you're talking a technicality here.
Yes, it's not the center in the traditional sense that it is in the center of the bow. However, it is the center as in the center placement for vertical tuning of the arrow.17 yrs of experience is nothing.
Yes, it's not the center in the traditional sense that it is in the center of the bow. However, it is the center as in the center placement for vertical tuning of the arrow.17 yrs of experience is nothing.
#16
Join Date: Sep 2007
Posts: 77
RE: Center shot on a Bowtech Old Glory
I could have sworn this was the "Technical" area of this forum. I'm sorry you think my mere 17 years in working on bows is insignificant. i just hate seeinhg less experienced archers, and new archers misinformed. The information i have provided above is correct, and your informatin about a good starting point for vertical rest location being the hole drilled in the riser is also correct.....the technical treminolgy is where we differ. call 6 pro shops and ask for a definition of center shot on a bow....then ask for a definition of "Vertical center shot".....i would be very interested in the response you get......The fact of the matter is.... the sight mounting hole in the riser of the bow hasn't been called a "Burger Button" hole for quite some time now....how many folks out there actually still use a burger button i'm unsure of....But i think they still sell them.....I had one on my first bow before the days of "Center shot " risers......
I'm done with this one bro.......You win.....i'll stand down.....please let us knowhow your "Vertical Center Shot"survey comes out......Kirk
I'm done with this one bro.......You win.....i'll stand down.....please let us knowhow your "Vertical Center Shot"survey comes out......Kirk
#17
Nontypical Buck
Join Date: Feb 2007
Location: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
Posts: 2,188
RE: Center shot on a Bowtech Old Glory
Bro, I didn't call it insignificant I just don't know why everyone has to list how many years of experience they have as being a drving factor on one's knowledge or ability? It's not misinformation, it's a disagreement in terms. It will always be the berger button hole. And is still refered to as such by most.I'm not sure why you think it's outdated and hasn't been called one in a while. Ok bro.
#19
Nontypical Buck
Join Date: Nov 2005
Location: Mn.
Posts: 3,399
RE: Center shot on a Bowtech Old Glory
OK you guys....remember back in the days when you could(still can)buy the plastic arrow rest(cheep looking thing)with the hole in it so you could stick it over the Berger button hole and screw the plunger in...if you got your nock right you were almost ,if not right on.....Even my PSE Kudu has it and I use it with the plastic stick on arrow rest because my 400 clasic carbons work best that way...but like some of you Ive only worked on/shot bows for 24 yrs and Iam stil learning a thing or two.