Bowtech shooters- speed vs. smooth?
#1
Fork Horn
Thread Starter
Join Date: Oct 2005
Location: NorthEast Arkansas river bottoms
Posts: 422
Bowtech shooters- speed vs. smooth?
A question for the Bowtech shooters, can you tell much of a difference in the smooth and speed modules? I have always had the smooth modules on my bow since new, but recently wanted to try the speed module. So I went to the Pro shop, and they let me try some out. The guy said the smooth was alot smoother, but when I shot the speed module, I couldn'ttell hardly any difference in smoothness. But it had better penetration. So my questions are-
Did you think the speed modules are worth the smoothness you give up?
How much better speed and penetration?
Im torn between sticking with the speed module or going back to the smooth. I shoot 30" draw at 68lbs. so I should get good speed even with the smooth. I can't tell now, but when it gets cold and I'm cold, it may make a difference under hunting conditions.
Any opinions?
Did you think the speed modules are worth the smoothness you give up?
How much better speed and penetration?
Im torn between sticking with the speed module or going back to the smooth. I shoot 30" draw at 68lbs. so I should get good speed even with the smooth. I can't tell now, but when it gets cold and I'm cold, it may make a difference under hunting conditions.
Any opinions?
#2
RE: Bowtech shooters- speed vs. smooth?
Bump. I have always shot the fast but I am curious what the smooth guys say. With the MeanV CSS, my bow isquieter than any of my hunting partners despite the fast mods and no string leeches.
#3
Join Date: Nov 2006
Location:
Posts: 24
RE: Bowtech shooters- speed vs. smooth?
I shoot the smooth mods and love them. The onlydifference that I noticed when I was shooting the speed mods is that it seemed to break over a little harder... with my setup I would only gain about3-5 fps with the speeds and lose that smooth draw that I am used to. Its really all personal preference in the end. I would shoot extensively with both and then decide.
#4
Fork Horn
Thread Starter
Join Date: Oct 2005
Location: NorthEast Arkansas river bottoms
Posts: 422
RE: Bowtech shooters- speed vs. smooth?
yeah, the break over point is all I notice too, and it's nothing really. The guy at the Pro shop said he has chrono'd the Bowtech's and every time its 8-10 fps faster with the speed module. It definately shoots flatter, but I wouldn't necessarily say better.
Honestly, I'd say its hard to go wrong either way.
Honestly, I'd say its hard to go wrong either way.
#5
Fork Horn
Thread Starter
Join Date: Oct 2005
Location: NorthEast Arkansas river bottoms
Posts: 422
RE: Bowtech shooters- speed vs. smooth?
Oh, as far as quietness, suppossedly there is no difference with either, I dunno myself. It hard for me to tell how quiet a bow is ifImthe one shooting it.
#7
RE: Bowtech shooters- speed vs. smooth?
I don't really understand the reason for the 2 different modules on hunting bows myself. At the speeds these bows shoot with the smooth mods you can kill anything in North America with even a 60# bow. What is even 10 more FPS going to do for you?
#8
Join Date: Feb 2006
Location: Kodiak, AK
Posts: 2,877
RE: Bowtech shooters- speed vs. smooth?
ORIGINAL: brucelanthier
I don't really understand the reason for the 2 different modules on hunting bows myself. At the speeds these bows shoot with the smooth mods you can kill anything in North America with even a 60# bow. What is even 10 more FPS going to do for you?
I don't really understand the reason for the 2 different modules on hunting bows myself. At the speeds these bows shoot with the smooth mods you can kill anything in North America with even a 60# bow. What is even 10 more FPS going to do for you?
#9
RE: Bowtech shooters- speed vs. smooth?
I preferred the smooth on mine. I did loose 8 fps, but the ability to let down if I don't get the shot is the main reason I went with the smooths.
That and the fact that I like a smoooth drawing bow.
That and the fact that I like a smoooth drawing bow.
#10
RE: Bowtech shooters- speed vs. smooth?
I guess I'm just used to the feel of what most people consider a harsh draw. I've shot the smooth mods and don't feel a huge difference. So I go with the speed.