Should I be shooting 125grain broadheads?
#11
RE: Should I be shooting 125grain broadheads?
ORIGINAL: m9a9g9i9c
I'm funny untill I draw my bow, then I'm dead serious....
F.
I'm funny untill I draw my bow, then I'm dead serious....
F.
#14
Typical Buck
Thread Starter
Join Date: Feb 2003
Location: North Dakota
Posts: 959
RE: Should I be shooting 125grain broadheads?
I think I might end up going with either winners choice or vapor trail as you suggested in an earlier post. Nothing agains gibblet. It is just that the turn around time he gave me would be 3 weeks. and opener here is august 31st....and the local shop that I haven't dealt with yet carries vapor trail I believe. I am pretty sure it is vapor trail. hope I haven't been making up a name.
#15
RE: Should I be shooting 125grain broadheads?
ORIGINAL: davepjr71
The 100 gr heads, and lighter, seem to be the rage anymore. I've had people tell me to drop to a 100 gr head. Why, I get a little higher FOC and my arrow is still carrying the mail out of my Allegiance.
Josh shot some of my tips and has decided to go to 125 gr tips also.
The hard part is finding a BH that you like at that weight without having to use a 100 gr with a weight to it. Muzzy does not make 125 gr MX series. [:@]
However, you have some good choices.
slicktricks
Wac'em Triton XL
NAP Crossfire
etc.
The 100 gr heads, and lighter, seem to be the rage anymore. I've had people tell me to drop to a 100 gr head. Why, I get a little higher FOC and my arrow is still carrying the mail out of my Allegiance.
Josh shot some of my tips and has decided to go to 125 gr tips also.
The hard part is finding a BH that you like at that weight without having to use a 100 gr with a weight to it. Muzzy does not make 125 gr MX series. [:@]
However, you have some good choices.
slicktricks
Wac'em Triton XL
NAP Crossfire
etc.
#16
Nontypical Buck
Join Date: Feb 2007
Location: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
Posts: 2,188
RE: Should I be shooting 125grain broadheads?
ArrowMike,
If you read my post I say that you can do that. However, I'd rather not add another component in between my head an shaft. Also, why not just make the 125 gr BH's. You can get 25 gr weights from GT.
If you read my post I say that you can do that. However, I'd rather not add another component in between my head an shaft. Also, why not just make the 125 gr BH's. You can get 25 gr weights from GT.