Am I too light?!
#22
Giant Nontypical
Join Date: Feb 2003
Posts: 9,175
RE: Am I too light?!
the most important things, beside reasonable weight, are a sharp broadhead, and excellent arrow flight..
But you can't 'just' add more weight up front. You have to plan it out first. Knowing how much weight you want up front, is a key step to figuring out what spine arrow shaft to use. The FOC calculator at Jackson's is a good tool for building cyber test arrows and playing with FOC values.
#23
RE: Am I too light?!
Arthur,
have you found it accurate?
in my admitted limited testing-what it claims my arrow weight in total is-to what is read on a digital scale is different.
another recommendation I would have is to use a cut on impact broadhead like the SteelForce.
a lady had a pass through on a Polar Bear shooting 54lbs Mathews SwitchBackXT
[/align]
#24
Giant Nontypical
Join Date: Feb 2003
Posts: 9,175
RE: Am I too light?!
It's not 100% on the mark, Doug, because the calculator uses average weights for arrow components. If the inserts, vanes and nocks weigh more or less than the averages the program uses, it will not weigh out dead nuts the same as the calculator says. On the other hand, it's plenty close enough to give you a very good idea of what you'll wind up with.
Actually, I've never had it be off more than 5 grains with the arrows I've run on it. I've seen greater weight variances than that within a dozen carbon shafts.
Agreed on the recommendation for cut on contact heads. Steelforce, Magnus Stingers, etc.
Actually, I've never had it be off more than 5 grains with the arrows I've run on it. I've seen greater weight variances than that within a dozen carbon shafts.
Agreed on the recommendation for cut on contact heads. Steelforce, Magnus Stingers, etc.
#25
RE: Am I too light?!
My wife's setup is pulling 50lbs and shooting a 385grain arrow and come hunting season she will be shooting a 100grain montec for broadheads. Out to 25 or 30 yards Im sure she will get enough penetration.
#27
Join Date: Feb 2003
Location:
Posts: 2,413
RE: Am I too light?!
I don't know if I would agree to just add more weight upfront..