talone

It does look like it was in some kind if a clamp that slipped. I would freak out as I'm like you andtake good care of my hunting equipment, more so than anything else I own. I would go in person with the bow I always had better luck talking face to face then over the phone.

DaveC

True that, plus there might be some customers in there which could help sway his eagerness to help your direction.

muzzyman88

Just an update. I talked to the shop today. She said she noticed the scratches when she put it in the press to change the limbs. However she wasn't sure how they got there. But, she did not hesitate to tell me that when the next Allegiance comes in, she'll swap me. Im very happy with that. I still think they might know what happened to the bow, but as long as its made right, I don't care.

Woodrow88

Thats the problem, you let a woman touch your bow!! Just kidding ladies

DaveC

Yep, that is what I'd think too.
She is going to swap the riser or the whole bow?

The serial Number with your lifetime warranty is on the riser.

A brand new Bow w/ new warranty? That would be nice.

Rick James

Make sure the new bow doesn't have the same problem with the spacing.........

Woodrow88

What would be a safe tolerance to have Rick James. Thinking of buying one want to check mine before I buy it.

Rick James

I don't have enough experience with the 07' or newer bowtech bows to give you a good answer to this. My recommendation is to send an PM to Bowtech_Shooter on here, Pat is tech support for Bowtech and can answer your question best.

Woodrow88

thanks rick I'll do that

davepjr71

muzzyman88

I just bought a 07 Allegiance and am curious myself in what the accpetable spacing looks like. There looks to be a little over 1/16" between the cam and the limb on my bow. Pics would be great.