blazers offset
#4
RE: blazers offset
There is a knob somewhere you can loosen and move the arrow into or away from the clamp. This will give you the offset you are looking for. If you can picture what offset is, you will maybe understand how to attain it...Offset is best described as the fletch running "across" the arrow...So the clamp can't be perfectly in line w/ the shaft.....If that makes sense...
#9
RE: blazers offset
Correct mob, the rear of the vane/feather (fletch) will be left of the forward end.
Right Offset will spin the arrow so that the point stays tight...although I used left for years and really didn't notice it. Right or left, still better than straight.
That wasn't advice was it? Just a statement.
Right Offset will spin the arrow so that the point stays tight...although I used left for years and really didn't notice it. Right or left, still better than straight.
That wasn't advice was it? Just a statement.