Bow Vise Opinion
#11
RE: Bow Vise Opinion
One of these days Rob,I will get someone over here to teach me how to post pictures.I am working on it.
The one I modified was not anApple but worked very similar.I just cut the clamps off and took a flat plate and drilled a clearance hole for the 5/16 stabilizer bolt.I then bent a 90deg angle on it and welded it to the rod that goes into the vise.
You couldmake a complete new mounting system and not tear up the clamp but I don't like them anyway.
The one I modified was not anApple but worked very similar.I just cut the clamps off and took a flat plate and drilled a clearance hole for the 5/16 stabilizer bolt.I then bent a 90deg angle on it and welded it to the rod that goes into the vise.
You couldmake a complete new mounting system and not tear up the clamp but I don't like them anyway.
#13
RE: Bow Vise Opinion
http://i129.photobucket.com/albums/p236/tfox_02/cid__1230061850.jpg
Here is a link,the picture was with my cell phone so the quality isn't very good but you get the idea.
Thanks TEmbry15 atleast I am able to get this far with pictures.
Here is a link,the picture was with my cell phone so the quality isn't very good but you get the idea.
Thanks TEmbry15 atleast I am able to get this far with pictures.