Equalizer module #s
#1
Typical Buck
Thread Starter
Join Date: Feb 2003
Location: Seattle, WA
Posts: 528
Equalizer module #s
Is it me or the search? I can't get anything return.
I remember postings regarding the modules for the Equalizer. Can someone point me to the info? I need 25" speed module and smooth module or the whole chart. Thanks.
I remember postings regarding the modules for the Equalizer. Can someone point me to the info? I need 25" speed module and smooth module or the whole chart. Thanks.
#5
RE: Equalizer module #s
The 2006 Equalizer takes an LE#3 mod for 25".
As TerryM mentioned, the draw stop should be set at approx. the 4.0 mark.
To properly set the draw stop you’ll start by counting down from the top of the cam (on a right hand bow) to the middle of the draw stop screw head. The first line on top counts as #1 with each long line representing the whole numbers and the short lines representing the half numbers.
As TerryM mentioned, the draw stop should be set at approx. the 4.0 mark.
To properly set the draw stop you’ll start by counting down from the top of the cam (on a right hand bow) to the middle of the draw stop screw head. The first line on top counts as #1 with each long line representing the whole numbers and the short lines representing the half numbers.
#6
Typical Buck
Thread Starter
Join Date: Feb 2003
Location: Seattle, WA
Posts: 528
RE: Equalizer module #s
Thanks all.
Bowtech_shooter or TerryM,
Do I count from the "L" or "S". When I looked at mine (just bought couple days ago), the draw stop wasn't on the 4th mark on either side. Base on this, I don't think it was set up correctly. If the draw stop is on the 4th mark, is this 80%?
It might be a tad short. Is the Equalizer come with 1/2" draw module? If not, what is the set up for the 26" module and the module number?
Thank you.
Bowtech_shooter or TerryM,
Do I count from the "L" or "S". When I looked at mine (just bought couple days ago), the draw stop wasn't on the 4th mark on either side. Base on this, I don't think it was set up correctly. If the draw stop is on the 4th mark, is this 80%?
It might be a tad short. Is the Equalizer come with 1/2" draw module? If not, what is the set up for the 26" module and the module number?
Thank you.