AAHHHHHHhhhh my bow's buggered up!!!!!!!
#11
RE: AAHHHHHHhhhh my bow's buggered up!!!!!!!
on my equalizer after about a week of shooting i noticed a vibration and checked the bow over and found that both module screws in both cams were loose so i tightened em up and havent had a problem yet its probly just that they dont get them tight enough from the factory and with bowtech's customer service it shouldn't be any problem at all getting u all fixed up
good luck man hope everything works out in time for the season
good luck man hope everything works out in time for the season
#12
RE: AAHHHHHHhhhh my bow's buggered up!!!!!!!
I'm fairly sure Bowtech will take care of it. My shop told me a story that you wouldn't believe and they covered it.............Dude cut is string on purpose...........after he knicked it with a broadhead and cut acouple strands.....he needed two new limbs, and new cams......bowtech said they would cover it once, but tell him to bring his checkbook next time.
#13
RE: AAHHHHHHhhhh my bow's buggered up!!!!!!!
i've got new limbs on the way for my consti. the limb cap is grating on the cam. shop said normal limb delivery time is now 3 weeks. its been 2 weeks already and still waiting. maybe you should call the factory direct since you have a trip coming up and plead your case.
#17
Nontypical Buck
Thread Starter
Join Date: Aug 2004
Location: Bradford, Ontario
Posts: 2,205
RE: AAHHHHHHhhhh my bow's buggered up!!!!!!!
Gibblett,
You think you guys pay alot for gas? Reg unleaded these days runs for 1.05 a liter up here. Thats around 4 bucks a gallon down there.
You think you guys pay alot for gas? Reg unleaded these days runs for 1.05 a liter up here. Thats around 4 bucks a gallon down there.
#18
RE: AAHHHHHHhhhh my bow's buggered up!!!!!!!
Jeremy!
Before tightening down your mod screw's ,just dab some blue Loc-tite on them [do not use the RED or you'll never get them out again]and they'll not come lose again .I had this problem with a previous bow that I owned[Golden Eagle]and was told that all the mod screw's on any bow should be loc-tited with the BLUE to prevent this problem from happening again. Since then I alway's loc-tite them down, and have never had a problem with them coming lose . You still need to check them anyway's ,just for safety sake .
nubo
Before tightening down your mod screw's ,just dab some blue Loc-tite on them [do not use the RED or you'll never get them out again]and they'll not come lose again .I had this problem with a previous bow that I owned[Golden Eagle]and was told that all the mod screw's on any bow should be loc-tited with the BLUE to prevent this problem from happening again. Since then I alway's loc-tite them down, and have never had a problem with them coming lose . You still need to check them anyway's ,just for safety sake .
nubo
#19
Join Date: Feb 2003
Location: Alvo Nebraska USA
Posts: 2,057
RE: AAHHHHHHhhhh my bow's buggered up!!!!!!!
Is it just me or are there others out there that do routine maintence and checks on their bows often? I wouldn't hold someone else responsible if I didn't get the oil filter tight on my truck when I changed oil and it ruined my motor. I don't think it's BowTech's responsibility to supply another set of limbs to correct someone's lack of routine maintence but maybe they will anyways.
Good luck..
Good luck..
#20
Nontypical Buck
Thread Starter
Join Date: Aug 2004
Location: Bradford, Ontario
Posts: 2,205
RE: AAHHHHHHhhhh my bow's buggered up!!!!!!!
UPDATE: Bowtech returned my emails first thing in the morning and I am glad to say all is well and they again prove why they are a great company to deal with. This was my first need of customer service and they took care of me. If anybody ever doubted Bowtechs commitment to service, don't !