Binary cam question
#5
Thread Starter
Join Date: Feb 2006
Location:
Posts: 137
RE: Binary cam question
My draw is in between 27.5- 28 . Just want to get close without effecting let-off. I had several bowtechs with infinity cams, just not familiar with the binaries . I thought the 05 models could lock up at full draw if you twisted the strings /cables to much. Not sure about the 06 models. Should I get the 27.5 modules and tweek up or the 28 modules and tweek the drawlength down? I'm trying to get closer to 80% let off.
#6
RE: Binary cam question
The module idea is awesome. I shoot a 32" Old Glory and at the pro-shop (Blueridge Backwoods) they just slapped a different module in and I was all set. It's the same string no matter how long/short you need the draw to be. This is one part that sold me on the Bowtech vs. the Trykon where the draw is pretty much fixed at where you want it with the Zephyr cam
#7
RE: Binary cam question
ORIGINAL: Chupacabras
My draw is in between 27.5- 28 . Just want to get close without effecting let-off. I had several bowtechs with infinity cams, just not familiar with the binaries . I thought the 05 models could lock up at full draw if you twisted the strings /cables to much. Not sure about the 06 models. Should I get the 27.5 modules and tweek up or the 28 modules and tweek the drawlength down? I'm trying to get closer to 80% let off.
My draw is in between 27.5- 28 . Just want to get close without effecting let-off. I had several bowtechs with infinity cams, just not familiar with the binaries . I thought the 05 models could lock up at full draw if you twisted the strings /cables to much. Not sure about the 06 models. Should I get the 27.5 modules and tweek up or the 28 modules and tweek the drawlength down? I'm trying to get closer to 80% let off.
#9
RE: Binary cam question
The only adjustment to these cams should be done with the draw stop. If you twist the cables on a 05 binary cam you run the risk of locking the cams up at full draw. If you over rotate the cams beyond the travel of the stop the cam will lock up. If your draw length is that far off change the cam, many of us still have plenty of 05 cams
Crackers
Crackers