BIGDADDYCAIN

WHEN I WAS SHOOTING MY BOETECH ALLEG. YESTERDAY IT STARTED SOUNDING LOUD. LOOKED IT OVER AND THE STOP ( I THINK ITS CALLED), THE LITTLE SCREW ON THE TOP CAM CAME LOOSE. THERE ARE SOME MARKS ABOVE THE SLOT. ? IS WHERE TO SET THE BACK TO AND TIGHTEN IT DOWN. PRETTY BAD I JUST SPENT $50 TO HAVE IT SET UP FOR ME AND ONLY AFTER 80 SHOTS THIS HAPPENS TO ME[:@]. ANY HELP WOULD BE GREAT. THE CAMS ARE STAMPED E 10.

gibblet

is it an '05 or '06?

BowTech_Shooter

If the cams are marked with an E#10 it must be an05 model.

To setthestop for 80% let off you'll need to have it set all the way up to the top of the slot.

Insatiable

I would put it about halfway first and then draw to see how the valley feels. If it tries to pull your arm off then move a little more toward the top and try again. You really need to be careful with the drw stop setting until you know your bow.
insatiable

nubo

To save it from coming loose again ,try a dab of BLUE Lock tite ,this will help it not coming loose in the future .

nubo

Greg / MO

Hey Big Daddy, you may have been lurking around here for years and know this already, but your post count indicates that you may be somewhat new around here... So, just to let you know, you got a direct reply from THE MAN there... BowTech_Shooter handles the techstuff for the company; take his word as gospel.

bowtech die hard

put wax on those set screws, it'll keep 'em from backing out.