MO_Bowhnter

I recently put in a new set of strings and installed a new peep. After shooting a little bit I felt my peep was a little too high. Finally I got into the right spot for me and havent been able to get enough adjustment out of my sight (up and down). I tried moving the peep up in small incriments but it doesnt seem to help. My sight is a CJ Deadnuts and adjusted all the way down. My peep height is nothing unordinary, my arrow is level with the berger button and at rest I'm about 1/8" nock high. What can I try to change without changing the peep height? It's already set and I've had enough fun already getting it there and being square to the string at full draw.

gibblet

so your arrows are going low?

MO_Bowhnter

Yea I guess I should have added that. About 4-5 inches at 20 yds. I'll also add that where my peep was originally set, I had no problems except that my peep height was uncomfortablly high.

Okie48

I tried moving the peep up in small incriments but it doesnt seem to help.


Wouldnt you lower your peep??

MO_Bowhnter

Well when I moved my peep sight from from its uncomfortably high position down to where I believe my normal position was before, my POI was about 1 ft. low. So that would lead my to believe that raising it back up to its original location would get me back to or close to normal.

mobow

If you shoot w/ a kisser, try moving that as well. It's the combination of the two.

Okie48

The only other thing I could think of if your nocking point needs to be lowered a tad