Always Wondered
#1
Always Wondered
I have wondered for quite sometime now why the bow manufacteurs havent come out with a bow that is set for 55#-65#.
I have been on these forums for almost 4 years and have read alot of polls,people's posts and so on and I have noticed that a great majority of their bows is set at 65#'s max.Give or take a lb or two.
I for one like to have my bow maxed out for my shooting.It gives me ease of mind knowing it is shooting to its full potential.I have decided that when I purchase a new bow it will probably be a 60 lbr hopefully going to say 62 lbs maxed.It will definately make much easier and enjoyable shooting.
Now on the other hand if a bow was made to max out at 65-66 lbs it would be a no-brainer for me.
I would think it would be good for the average shooter or experienced who likes the low poundage as well.Here they can shoot 55lbs all off season and pump up the poundage before hunting season if so desired.
Is it just me or a bow that has these capabilities would be a great seller.?
You would have to forget about AMO and IBO specs.
Say for instance,BOWTECH,came out with a bow like the Tribute or Allegiance(maxing at 65-66 lbs)they would have to come up with their own speed rating as one of their selling qualities.
Say BSR(bowtech speed rating)----here they would take the mostcommon draw length of say 29 inches,an arrow of say 400 grains and bingo,you got your average speed.Post it on BC and you know what your goinna get for the average shooter.
So what does everyone think----Would a bow set for 55-65 lbs be a good seller or just stick with the way it is.?
I have been on these forums for almost 4 years and have read alot of polls,people's posts and so on and I have noticed that a great majority of their bows is set at 65#'s max.Give or take a lb or two.
I for one like to have my bow maxed out for my shooting.It gives me ease of mind knowing it is shooting to its full potential.I have decided that when I purchase a new bow it will probably be a 60 lbr hopefully going to say 62 lbs maxed.It will definately make much easier and enjoyable shooting.
Now on the other hand if a bow was made to max out at 65-66 lbs it would be a no-brainer for me.
I would think it would be good for the average shooter or experienced who likes the low poundage as well.Here they can shoot 55lbs all off season and pump up the poundage before hunting season if so desired.
Is it just me or a bow that has these capabilities would be a great seller.?
You would have to forget about AMO and IBO specs.
Say for instance,BOWTECH,came out with a bow like the Tribute or Allegiance(maxing at 65-66 lbs)they would have to come up with their own speed rating as one of their selling qualities.
Say BSR(bowtech speed rating)----here they would take the mostcommon draw length of say 29 inches,an arrow of say 400 grains and bingo,you got your average speed.Post it on BC and you know what your goinna get for the average shooter.
So what does everyone think----Would a bow set for 55-65 lbs be a good seller or just stick with the way it is.?
#6
RE: Always Wondered
I'd definately go that route ,I've been thinking of the 70lbr ,but haven't made the decission yet because 70lb's just might bot be right for me in certain situation's ,but 65 would be perfect .
nubo
nubo
#7
RE: Always Wondered
I agree about the 65# max bow and tried to special order my last one that way- I didn't quiet get what I asked for.
As far as the speed rating goes 65#x 5 gpp= 325 grain test arrow. No need in a new formula.
Although a 29" draw 400 grain arrow "hunting" formula would be nice to see before buying.
I also let down my 70# bows to ~65, but always wonder how it effects tunability sincethe string length, cable length and cam timing marks are allbased on a bow set up at peak weight. Letting the bow down shrinks the ATA at tad bit and increases the brace thus altering all of the above mentioned tuning parameters. Is it enough to matter? I don't know but it's something I always wonder about.
As far as the speed rating goes 65#x 5 gpp= 325 grain test arrow. No need in a new formula.
Although a 29" draw 400 grain arrow "hunting" formula would be nice to see before buying.
I also let down my 70# bows to ~65, but always wonder how it effects tunability sincethe string length, cable length and cam timing marks are allbased on a bow set up at peak weight. Letting the bow down shrinks the ATA at tad bit and increases the brace thus altering all of the above mentioned tuning parameters. Is it enough to matter? I don't know but it's something I always wonder about.
#8
Nontypical Buck
Join Date: Feb 2003
Location: Eastern PA USA
Posts: 1,398
RE: Always Wondered
Yeah, even though I'm getting up there in years (54 soon) and have had shoulder injuries, #65 is a good weight for me to pull. Don't know how much faster it really is than my 60 pounders, peaking at #61 or 62 though.
Ironically enough, both of the MQ1s I owned peaked at #66. The only thing is, the first one was a 60-70 bow, and the last one was a 50-60.
Ironically enough, both of the MQ1s I owned peaked at #66. The only thing is, the first one was a 60-70 bow, and the last one was a 50-60.
#9
RE: Always Wondered
I'll sign the petition. That is a great idea. Hope some one out there who cares is listening! If a manufacturer is reading this it may be a selling point. You may sell more bows! After all isn't that what it's all about?